manualshive.com logo in svg

Toshiba PERCEPTION 4000, User Manual

Share
Download
Toshiba PERCEPTION 4000 User Manual Download Page 15

PERCEPTION 4000

GENERAL INFORMATION

1-5

RECALL DIAL TONE
Three short pulses followed by continuous tone. This tone indicates that
additional digit entry is required to complete the current feature. 

REORDER TONE
A repeating .25 second on, .25 second off tone which indicates that your
call has been denied due to a dialing error or service restrictions.

RINGBACK TONE
A repeating 1 second on, 3 seconds off tone which indicates that your
call is ringing.

SUCCESS TONE
A siren tone which indicates that feature activation has been accepted by
the system.

RINGING PATTERNS

Each ringing pattern that is supported by the PERCEPTION 4000 system
is described below. A visual depiction of each ringing pattern is provided
at the end of this user guide.

INTERNAL CALL RINGING
Indicated by a ringing signal generated through the telephone speaker
every 4 seconds.

EXTERNAL OR ATTENDANT CALL RINGING
Indicated by a double ringing signal generated through the telephone
speaker every 4 seconds. 

RECALL RINGING

Indicated by a fast ringing signal generated through the telephone
speaker. A recall can occur during Call Hold, Call Park, Call Transfer, or
Camp-on feature operation. 

TIMERS

Throughout this user guide are several references to time periods that
precede feature operation or availability, and that serve in system error
detection. Each of these timers is referred to as a predetermined time
period, and is assigned in the system database. Timers are provided on
a system-wide basis, and are transparent to station users. No type of
station operation is necessary to program these time periods. 

PERCEPTION 4000

GENERAL INFORMATION

Summary of Contents for PERCEPTION 4000





































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands