Toshiba PDR-M500, Service Manual

Page: 8 / 49

9
Remove the screws
01635-350*2 from the
camera to remove the
base of Mode Dial
A410.
Screw driver
10
Remove the screw
01635-149 from the
Tripod Holder A340.
Remove the Flex Cable
Main-LCD H600 from
the Main PCB ASSY
U100.
Screw driver
Tweezers
11
Remove the screw
01635-000 from the
Main Frame A300.
Screw driver
12
Hold Pushing the Flash
Open Switch A440 and
pull up the Jack Cover
A250 to separate the
Main Frame A300. Check the small
kinks on the
surface of Main
Frame A300 are
appeared.
13
Pull out the Main Frame
A300 from the Front
Cover ASSY A100 with
finger as shown.
14
Remove the Front
Cover ASSY A100
from the camera.
Jack Cover A250
and the pin will
drop down in the
meantime.
15
Detach the wire from
Flash PCB KIT U300 as
shown. Detach the FPC
cable from Lens Module
ASSY H100.
Tweezers
16
Desolder the wires from
the Mode PCB ASSY
U510.
Soldering iron
17
Remove all the screws
01635-000*3 from the
camera.
Screw driver
6