34
3-9 F/W Update Procedure
Tools:
AC Adapter
SD Card with Update Firmware
Procedure:
1.
Install the SD card with firmware update program into camera. Close the card cover.
2.
Attach AC Adapter to camera. Keep pressing the ERASE button and then slide the Power switch to power on the
camera.
3.
The camera displays update information on the TFT LCD as shown in figure 3.9.1
4.
The update procedure will be finished when it displays COMPLETED message on LCD shown as figure 3.9.2.
Turn off the camera and remove the SD Card.
Fig. 3.9.1
Fig. 3.9.2
5.
Turn the mode dial to SETUP mode and slide the Power switch to power on the camera.
6.
Press the UP/DOWN button to select the item LANGUAGE. Then press the SELF-TIMER button and SHUTTER
button together to enter the area code menu as shown in figure 3.9.3.
7.
Press the UP/DOWN button to select the correct area then press ENTER.
8.
It displays the version information as shown in figure 3.9.4. Check the relative information and make sure the
software version is updated.
Area Code
Place
OSD Language
Video Output
The Time & Date format
A North
America English
NTSC
MM.DD.YYYY
J Japan Japanese NTSC YYYY.MM.DD
E Europe English
PAL
DD.MM.YYYY
(U) UK English PAL DD.MM.YYYY
C China
Simplified
Chinese
PAL YYYY.MM.DD
Attention: The firmware will be damage if the power supply is stopped while proceeding update.
Fig. 3.9.3
Fig. 3.9.4
0.50
A
Summary of Contents for PDR-M500
Page 1: ...SERVICE MANUAL FILE NO 210 200316 DIGITAL STILL CAMERA PDR M500 CREATED IN TAIWAN AUG 2003 ...
Page 24: ...22 Fig 3 3 10 ...
Page 34: ...32 Fig 3 7 7 ...
Page 49: ......
