Toshiba PDR-2300 Owner'S Manual Download Page 93

Page: 93 / 98

Other Useful

Information

Taking Pictures

laying Back/

Erasing Images

Recording & V

iewing

ideo Clips

Connecting to

the Computer

Getting Ready

Troubleshooting (continued)

Problem

Cause

Solution

No photograph is taken

when the shutter button

is released.

The flash cannot be
used.

The played-back image
is too dark even though
the flash fired.

The played-back image
is blurred.

A single image cannot be

erased.

The date and time
settings are cleared.

Internal memory full or the SD memory
card full.

No enough space in the SD memory card.

The SD memory card is write-protected.

The SD memory card is not formatted.

The SD memory card is damaged.

Auto Power Off is functioning.

You selected flash Off mode.

You pressed the shutter button while the
flash was charging.

The subject is too far away.

The lens is not clean.

You didn’t hold your camera firmly while
taking photographs.

The SD memory card is write-protected.

The image is protected.

The camera is left for a long period of time
without batteries.

Erase some images in either of them to
increase space for photographing.

Insert a new SD memory card. Erase saved
images to increase the empty space.

Cancel the write-protection. Replace with a
new SD memory card.

Format the SD memory card.

Insert a new SD memory card.

Turn the camera on again.

Select another flash mode.

Take a photograph until flash charging is
complete.

Move closer to the subject.

Clean the lens.

Place the camera on a stable surface or
use a tripod to take photographs.

Cancel the write-protection.

Cancel the image protection.

Set the date and time again.

Summary of Contents for PDR-2300



































































































Search results

Summary of Contents for PDR-2300

Reviews:

Related manuals for PDR-2300

Brands by name

Popular brands

Toshiba PDR-2300, Owner'S Manual

Search results

Summary of Contents for PDR-2300

Reviews:

Related manuals for PDR-2300

Brands by name

Popular brands