Toshiba MMY-MAP0804 Series, Quick Reference

Page: 28 / 52

27
Method to Set Indoor Unit Function DN Code
When Performing this Task, be sure to Use a Wired Remote Controller
5 4
6
3
TEMP. ON / OFF
SET
TIME
TEST
FILTER
RESET CL
SAVE
SWING/FIX
VENT
UNIT LOUVER
CODE No.
UNIT No.
No. R.C.
TIMER SET MODE FAN
SET DATA SETTING
2 1
<Procedure> To be performed only when system at rest
1
Push the TEST + SET + CL buttons simultaneously and hold for at least
4 seconds.
The unit No. displayed first is the address of the header indoor unit in
group control. Then the fan and louver of the selected indoor unit move.
2
Each time the “Select unit” side of the UNIT LOUVER button is pressed,
one of the indoor unit Nos. under group control is displayed in turn.
Then the fan and louver of the selected indoor unit move.
3
Use the TEMP. button to select the CODE No. (DN code) of the
desired function.
4
Use the TIME button to select the desired SET DATA associated
with the selected function.
5
Push the SET button. (The display changes from flashing to steady.)
• To change the selected indoor unit, go back to step
2
.
• To change the selected function, go back to step
3
.
6
When the
SET
button is pushed, the system returns to normal off state.
Type
DN code “10”
∗
1 Default value stored in EEPROM mounted on service P.C. board
Indoor Unit Capacity
DN code “11”
Value
0000
0001
∗
1
0002
0003
0004
0005
0006
0007
0008
0010
0011
0013
0014
0016
0018
0050
Type
1-way Air Discharge Cassette
4-way Air Discharge Cassette
2-way Air Discharge Cassette
1-way Air Discharge Cassette (Compact)
Concealed Duct Standard
Slim Duct
Concealed Duct High Static Pressure
Under Ceiling
High Wall
Floor Standing Cabinet
Floor Standing Concealed
Floor Standing
Compact 4-way Air Discharge Cassette
Fresh Air Intake indoor unit (Duct type)
Console
DX coil
Model
MMU-AP ∗∗∗ SH
MMU-AP
∗∗∗
H
MMU-AP ∗∗∗ WH
MMU-AP ∗∗∗ YH
MMD-AP
∗∗∗
BH
MMD-AP ∗∗∗ SPH (SH)
MMD-AP ∗∗∗ H
MMC-AP
∗∗∗
H
MMK-AP ∗∗∗ H
MML-AP ∗∗∗ H
MML-AP
∗∗∗
BH
MMF-AP ∗∗∗ H
MMU-AP ∗∗∗ MH
MMD-AP
∗∗∗
HFE
MML-AP ∗∗∗∗ NH-E
MMD-VNK ∗∗∗ HEXE
Value
0000
∗
1
0001
0003
0005
0007
0009
0011
0012
0013
0015
0017
0018
0021
0023
Capacity
Invalid
007 type
009 type
012 type
015 type
018 type
024 type
027 type
030 type
036 type
048 type
056 type
072 type
096 type