30
6. APPLIED CONTROL
6-1. Indoor Unit
6-1-1. Setup of Selecting Function in Indoor Unit
(Be sure to Execute Setup by a Wired Remote Controller)
<Procedure> Execute the setup operation while the unit stops.
1
Push SET ,
CL
, and
buttons simultaneously for 4 seconds or more.
The firstly displayed unit No. indicates the header indoor unit address in the group control.
In this time, the fan of the selected indoor unit is turned on.
2
Every pushing
UNIT
button, the indoor unit numbers in the group control are successively
displayed. In this time, the fan of the selected indoor unit only is turned on.
3
Specify the item code (DN) using the setup temperature
and
buttons.
4
Select the setup data using the timer time
and
buttons.
(When selecting the DN code to “33”, change the temperature indication of the unit from “°C”
to “°F” on the remote controller.)
5
Push SET button. (OK if display goes on.)
• To change the selected indoor unit, return to procedure
2
.
• To change the item to be set up, return to procedure
3
.
6
Pushing
button returns the status to normal stop status.
UNIT
SET
CL
1
4
2
3
6
5
FILE NO. SVM-05052
Summary of Contents for MMK-AP0072H
Page 125: ...TOSHIBA CARRIER CORPORATION ...
