Toshiba MMK-AP0072H, Service Manual

Page: 11 / 125

11
1
SET DATA display
Displayed during setup of the timer.
2
Operation mode select display
The selected operation mode is displayed.
3
CHECK display
Displayed while the protective device works or a
trouble occurs.
4
Timer time display
Time of the timer is displayed. (When a trouble
occurs, the check code is displayed.)
5
Timer SETIN setup display
When pushing the Timer SETIN button, the
display of the timer is selected in order of
[OFF]
→
[OFF] repeat OFF timer
→
[ON]
→
No display.
6
Filter display
If “FILTER ” is displayed, clean the air filter.
7
TEST run display
Displayed during a test run.
8
Flap position display
Displays flap position.
9
SWING display
Displayed during up/down movement of the flap.
10
Set up temperature display
The selected set up temp. is displayed.
11
Remote controller sensor display
Displayed while the sensor of the remote
controller is used.
12
PRE-HEAT display
Displayed when the heating operation starts or
defrost operation is carried out.
While this indication is displayed, the indoor
fan stops or the mode enters in LOW.
13
No function display
Displayed if there is no function even if the
button is pushed.
14
Air volume select display
The selected air volume mode is displayed.
(AUTO)
(HIGH)
(MED.)
(LOW)
15
Stand by display
Displayed when unit cannot start cooling
operation because other indoor units are being
heating operation.
Display
section
Operation
section
UNIT
SET CL
SETTING
UNIT No.
CODE No.
TEST
SET DATA
R.C. No.
SETTING
UNIT No.
CODE No.
TEST
SET DATA
R.C. No.
1
2
8
Central control
9
10
11
12
13
14
5
6
7
3
4
In reality only, the selected contents are indicated.
• When turning on the leak breaker at the first time, [SET DATA] flashes
on the display part of the remote controller. While this display is
flashing, the model is being automatically confirmed. Accordingly, wait
for a while after [SET DATA] display has disappeared, and then use
the remote controller.
3-3. Parts Name of Remote Controller
Operation section
• Using a remote controller, maximum 8 indoor units can be operated.
• After the operation contents have been once set up, the remote controller can be operated by pushing ON/OFF
buttons only.
FILE NO. SVM-05052