manualshive.com logo in svg

Toshiba LICSTAR-IV SE, Instruction Manual, Page: 37 / 262

Share
Download
Toshiba LICSTAR-IV SE Instruction Manual Download Page 37

SUBMASTER PANEL 

 

13) Right-shifting 

submasters 

Operating procedure  

 

  

 

 

 

 

 

 

(1) Press the SHIFT

Ö

 button. 

 

The SHIFT

Ö

 button lights up. 

(2) 

Press the REC/

Ø

 button twice. 

Pressing the REC/

Ø

 button once makes the REC/

Ø

 button flash. 

Pressing the REC/

Ø

 button again makes the REC/

Ø

 and SHIFT

Ö

 buttons go out. 

At this time, assignments to this submaster and after are shifted to the following 
submasters on a one-to-one basis, with the result that the assignment to this 
submaster is lost.

 

If shifting is not required, press the CANCEL button. 

Pressing the SHIFT

Ö

 button again while it is lit makes the SHIFT

Ö

 button go out 

and cancels the shifting request. 

Example)  In order to insert an empty submaster between submasters 5 and 6. 

Press the 

REC/

Ø

 button for submaster 6. 

 

 

 

[SHIFT

Ö

 button LED status] 

ON 

: An empty submaster can be inserted. 

 

Notes  

•

  Insertion takes place only within the current page and does not affect other pages. 

•

  This function does not work when the last submaster has already been recorded. 

 

4-11 

 

Summary of Contents for LICSTAR-IV SE







































































































































































































































































Reviews:

No comments