manualshive.com logo in svg

Toshiba LICSTAR-IV SE, Instruction Manual, Page: 36 / 262

Share
Download
Toshiba LICSTAR-IV SE Instruction Manual Download Page 36

SUBMASTER PANEL 

 

12)  Deleting sequential assignment from submasters 
Operating procedure  

 

  

 

 

 

 

 

 

(1)  Press the SEQ button. 

 

The SEQ button lights up. 

(2)  Press the RESET button on the SETTING panel. 

“RESET” is displayed on the command line of the SETTING screen. 

(3) Press the 

×

 button on the SETTING panel. 

(4) Press the REC/

Ø

 button twice above the submaster fader the sequential 

assignment of which is to be deleted. 

Pressing the REC/

Ø

 button once makes the REC/

Ø

 button flash.

 

Pressing the REC/

Ø

 button again makes the SEQ button go out. After the 

submaster for which the REC/

Ø

 button was pressed, patterns are deleted in the 

order in which they are recorded until the last submaster, starting with the specified 
PATTERN number.

 

When deletion of sequential assignments is not required, press the CANCEL 
button. 

Pressing the SEQ button again while it is lit makes the SEQ button go out and 
cancels the deletion request for sequential assignment. 

 

 

 

 

Notes

 

•

  Sequential assignment is not deleted for the submasters for which LOCK or INHIBIT functions are 

active. 

 
 

4-10 

 

Summary of Contents for LICSTAR-IV SE







































































































































































































































































Reviews:

No comments