PROFILE CURVE Screen
3)
Switching the display mode (input mode)
3.1) Switching to the pattern data display mode
Press the F2 (DATA) button.
3.2) Switching to the comment display mode
Press the F3 (LIST) button.
4)
Creating profile curve pattern data (simple creation)
Step 1)
Pressing the F2 (DATA) button enters pattern data input mode.
Step 2)
Select a pattern number.
> F1 (PROFIL) Pattern number
↵
Example)
Select pattern 8.
> PROFILE 08
↵
Step 3)
Click the left mouse button on the graph at the right of the screen.
Starting from the position clicked, five gradations are set at the specified levels.
The horizontal axis of the graph represents the input level, and the vertical axis presents
the output level.
5)
Creating profile curve pattern data (simple creation)
Step 1)
Pressing the F2 (DATA) button enters pattern data input mode.
Step 2)
Select a pattern number.
> F1 (PROFIL) Pattern number
↵
Example)
Select pattern 8.
> PROFILE 08
↵
Step 3)
Move the cursor within the data displayed at the left of the screen by using the
←
,
→
,
↑
,
and
↓
buttons.
Step 4)
Enter a two digit value to set the level at the cursor position.
To set the level to 10%, enter 1, 0, and
↵
.
To set the FL% level to 10%, enter 1, 0, and 0.
6)
Adding comments to the currently selected profile curve pattern data
* To enter the comment, use the keyboard. * Refer to the attached sheet “How to enter comments.”
> F5 (COMENT) Comment characters
↵
Example) Add the comment “TEST" to the currently selected pattern8.
> PROFILE 08 COMMEMT = TEST
↵
24-4