manualshive.com logo in svg

Toshiba LICSTAR-IV SE, Instruction Manual, Page: 227 / 262

Share
Download
Toshiba LICSTAR-IV SE Instruction Manual Download Page 227

GRAPHIC PANEL 

40-11 

PART/MIXING PANEL 
(PART MODE) 

 
 

1. Function 

This screen allows you to play back each individual PART. 
It also allows you to manually adjust the playback time using the wheel for PARTs. 

 
 

2. Operation 

The following operations are possible when the PART LED in the PART/MIX button is lit, indicating 
that part mode is in operation. 

 

1) 

Playback of individual PARTs 

When CUE with manually set PART DELAY time is played back using the GO button on the 
PLAYBACK panel, the LED in the GO/FIX button on the PART/MIXING panel flashes. 
Pressing the GO/FIX button while the LED in the button is flashing causes that PART to start fading. 

 

(Waiting for the GO button to be pressed) 

GO/FIX button LED     FLASHING 

 

(Playback during the PART time) 

GO/FIX button LED     ON 

 

(Playback not during the PART time) 

GO/FIX button LED     OFF 

 
 

2) 

Adjusting PART playback time 

*  Adjustment using the mixing wheel is only temporary editing and does not affect current recorded 

data. 

 

PART playback time can be adjusted by moving the wheel for PART vertically. 
This wheel adjusts the upfade and downfade at the same time. 
Move the mixing wheel upward to make the playback time shorter. 
Move the mixing wheel downward to make the playback time longer. 

 
 

3) 

Playing back the PART manually 

Step 1)  Press the MANU/

Ø

 button on the PART/MIXING panel. 

The LED in the MANU/

Ø

 button lights up and manual mode is entered. 

 

Step 2)  PART fader master level can be adjusted together with the upfade and downfade by moving 

the wheel for PART vertically. 
Rotate the mixing wheel upwards to increase fading towards 100%. 
Rotate the mixing wheel downwards to reduce fading towards 0%. 
When fading reaches 100%, the playback of the PART ends. 

 
 

Summary of Contents for LICSTAR-IV SE







































































































































































































































































Reviews:

No comments