88
Configuring the Client PC
All configurations take place in the Emergency Agent window on the Client
PC for descriptions and locations of the buttons and features of the
Emergency Agent window refer to the Emergency Agent window section
later in this chapter.
1.
Open the Emergency Agent window on the Client PC -
Start
>All Programs > Surveillix > Emergency Agent >
Emergency Agent.
2.
Right-click in the
DVR List
and select
New
. Enter the
DVR
Code
,
DVR Name
, and
IP Address
of the recorder.
3.
Click the
Options
menu and select
Setup
.
4.
Confirm that the
Network Port
in the
Setup
window is set to
the same number as the Emergency Port in Network Settings on the recorder. If the numbers are different adjust the
Network
Port
on the client PC to match the recorder.
5.
Click
OK
.
6.
Restart the Client PC.
Setup Window
Network Port
Indicates the port which the Emergency Agent uses to listen for incoming events. This number should be changed to the same number as
is set in the Emergency Port in Network Settings on the recorder.
Save Directory
Sets the location that recorded video footage is saved to.
Notice Options
Configuration settings for activating an
audible indicator or popup window when the
Emergency Agent receives an event.
