32338AC
33
Hybrid Sensor Setup
This interface is used to link Hard Contact Sensor Inputs from supported Network Devices to the recorder software.
1.
Click
Setup
.
2.
Click
Alarms/Sensor
, and then click the
Sensors
tab.
3.
In the Hybrid Sensor Setup area, click
Setup
.
4.
Select a camera from the
Network Device List.
5.
Double-click
DVR Relay No
, and then select a relay to assign to this camera.
6.
Click
Apply
.
7.
Click
Apply
again to save your settings.
Relays
1.
Click Setup.
2.
Click Alarms/Sensor, and then click the
Relays
tab.
3.
Double-click
Relay Name
for each relay to assign a name.
4.
Click
Apply
to save your settings.
