BASE STATION INTERFACE
Powering on the Handset
1-10
IP4100 Install Sept., 2013
BASE STATION
INTERFACE
Each base station has a built-in HTTP server that controls the
configuration interface. To open the web page:
1.
Open a web browser window and type the IP address of the base
station in the address bar. If you don't know the base station's IP
address, try one of the following:
A. Use the IP Search function on the handsets. On any handset,
press
Menu
, then enter
*47*
(*IP*). After several seconds, the
handset displays the MAC and IP addresses of all base stations
within range. Find the MAC address of the base station in the list
to determine its IP address. To exit IP Search, press
End
twice.
B. If your network supports Dynamic DNS, then type
ipdect<{MAC}>
in the address bar of your browser (just insert
the MAC address of the base station in place of {MAC}).
Table 1-4
Summary: Basic System Configuration
Step
Screens Used
Notes
General System Settings
Change the name that appears at the top of the
configuration screens, specify a configuration server, and
enable SIP and system logs.
Management
Required
Change the default user name and password.
Web Security
Recommended
Change the PSTN tones and emergency dialing format.
Country
Required for countries
other than the US and
Canada
Configure Basic Network Settings
Network
Required
Specify time server address and DST settings.
Time Settings
Required (If you are
updating Server
information, you must
reboot the base station
for changes to take
effect.)
SIP Server Settings
Program the SIP server(s).
The SIP server is the IPedge or Strata CIX system.
Network
Required (You must
reboot the base station
for changes to take
effect).
Servers
Program extensions on each IPedge or Strata CIX system. Extensions
Required
Register a handset to each extension.
Extensions
Required
