Toshiba ID EDGE, Description

Page: 113 / 142

Appendix – Specifications
System Tones
IPedge General Description 01/12
99
Ring tones are described, along with their cadences in Table 9 . Due to the limitation in the tone
generation algorithm, the listed tone duration is slightly different from the actual one.
Table 9 Ring Tones
Tone Name Description Ringing Cadence
Internal/External Ring 1
Incoming call from internal or external
party to IP telephones. (10 different ring
tones are available with R1.3 or higher
software.)
500 Hz 1 sec. On, 3 sec. Off, repeat
Internal/External Ring 2 1300 Hz 1 sec. On, 1 sec. Off, repeat
Internal/External Ring
11
500/640 Hz 1 sec. On, 3 sec. Off, repeat
Internal/External Ring
12
500/640 Hz 1 sec. On, 1 sec. Off, repeat
Internal/External Ring
13
860/1180 Hz 1 sec. On, 3 sec. Off, repeat
Internal/External Ring
14
860/1180 Hz 1 sec. On, 1 sec. Off, repeat
Internal/External Ring
15
1300/1780 Hz 1 sec. On, 3 sec. Off, repeat
Internal/External Ring
16
1300/1780 Hz 1 sec. On, 1 sec. Off, repeat
Internal/External Ring
17
860/1180 Hz 0.5 sec. On, 1300/1780 Hz 3
sec. Off, repeat
Internal/External Ring
18
860/1180 Hz 0.5 sec. On, 1300/1780 Hz 1
sec. Off, repeat
External/Internal Ring
for Standard
Telephones
Internal and External Ringing Cadence:
For Release 1.3 and higher, two types of
ringing cadences can be selected in
system programming.
Ringing Type1: External Ring: 20Hz, 1sec.
On - 3 sec. Off
Internal Ring: 20Hz, 0.4 sec.On - 0.2 sec.
OFF
- 0.4 sec.On - 3 sec. Off
Recall:20Hz, 1sec. On - 1sec. Off
Ringing Type 2: Same Ringing Cadence as
DK.
External Ring: 20Hz, 0.4 sec. On - 0.2 sec.
Off
- 0.4 sec. On - 3 sec. Off
Internal Ring: 20Hz, 1 sec. On - 3 sec. Off
Recall: 20Hz, 1 sec. On - 3 sec. Off
Recall
A call is returned & needs to be
answered.
2 kHz interrupted at 10 Hz, 1 sec. On, 1 sec.
Off, repeat.
Recall for Standard
Telephone
A call is returned & needs to be
answered.
20 Hz, 1 sec. On, 1 sec. Off, repeat.
Ring Over Busy
(Internal)
Call rings an idle [DN] or CO line button
while phone is busy. Another internal call
offered to an idle button while the station
is busy.
2 kHz interrupted at 10 Hz, 1 sec. On, 3 sec.
Off, twice or repeat (For Call Waiting, twice
only).
Call Waiting (Internal)
Internal call is waiting for the busy
button. A call is camped-on to a busy
[DN] or CO line button.
Ring Over Busy
(External)
Call rings an idle [DN] or CO line button
while phone is busy. Another incoming
call is offered to an idle button while
phone is busy.
2 kHz interrupted at 10 Hz, 2 bursts of 0.25
sec. apart 0.25 sec., twice apart 3 sec. or
continuous (For Call Waiting, twice only).
Standard telephones with Caller ID also
receive an 80 ms burst of CAS tone at -14 to
32dBM
Call Waiting (External)
External call is waiting for busy station. A
call is camped-on to a busy [DN] or CO
line button.
Volume Control -
Ringing Speaker
Adjusts speaker volume for ringing state. 500/640 Hz continuous.