Toshiba HWS-1104H series Quick Reference Manual Download Page 30 | Manualshive

Page: 30 / 64

background image

29

If “C” is selected then the control details, already set for the specified day, are copied. These details
can be copied to other days of the scheduled timer

If “L” is selected then all of the control details, set for the specified day, are deleted



Specifying the Step ON/OFF time, operation mode & set temperature:

ON/OFF Time: Use the TIME ▲ ▼ buttons to set the required ON/OFF time for the specified control
step

Operating Mode: To select or deselect the hot water function press the HOT WATER button on the
remote controller
To select or deselect either space heating function press the Zone1, 2 button on the remote
controller

When the function is selected to turn ON (at the specified time) then a numerical temperature is
displayed in the relevant window on the remote controller. When the function is selected to Turn
OFF (at the specified time) then the remote controller will display

- - - -

To select either heating or cooling press the OPERATE MODE button on the remote controller.
When heating is selected then

will be displayed on the remote controller. If cooling mode is

selected then

will be displayed.

Set Point Temperature: Press the SELECT button, on the remote controller to select either space
Zone 1, Zone 2 or HOT WATER. Press the TEMPERATURE ▲ ▼buttons to set the required
temperature

When the ON/OFF time, operating mode and set point temperature have been entered into the
schedule timer press the SET button to confirm the settings



Leaving the schedule timer function:

When the scheduled timer function has been set for the required days press the SCHEDULE button
to end the schedule setting function. The remote controller display will return to the main display
screen and the

icon, on the remote controller display, will flash. Press the SET button within 5

seconds of the icon flashing

– the

icon changes to lit and is continuously displayed. The timer

schedule is now in operation



How to copy a program

When specifying the STEP number (see details above) select “C” and press the SET button. This
copies all of the previously set data for that day.

Press the DAY button to move the

▼ above the new schedule timer day. Press the SET button to

copy the required data into the new day.

Repeat this process for all days required

«
...
28
29
30
31
32
...
»

Summary of Contents for HWS-1104H series

































































Reviews:

No comments

Related manuals for HWS-1104H series

Brand: Saci Pages: 24

Brand: Calpeda Pages: 4

Brand: JEC Pages: 13

Brand: Vaillant Pages: 80

Brand: Bard Pages: 26

Nano-Flow 2,600

Brand: Cobalt Digital Inc Pages: 2

Brand: laguna Pages: 8

Alwayzaire P3062

Brand: Bestway Pages: 2

Brand: Orbegozo Pages: 85

FIGHTER 2010 Series

Brand: Nibe Pages: 36

Brand: Macnaught Pages: 24

Brand: vacuubrand Pages: 72

Brand: Wayne Pages: 4

Brand: Altrad Pages: 30

Brand: Daikin Pages: 12

Brand: W. Tombling Pages: 2

CENTRO-MATIC 85430

Brand: Lincoln Pages: 14

Brand: Maytag Pages: 12

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands