Toshiba ESTIA R32 HWT-1101F21MT6W-E, Manual

Page: 61 / 92

1
2
3
4
Test mode
FIELD SETTING MENU(1/2)
Floor drying
Forced defrosting
Information input
SET
Alarm history
FC:14
FC:15
FC:16
°C
50
49
48
47
46
45
44
43
42
41
40
39
38
37
36
35
34
33
32
31
30
29
28
27
26
25
24
:
:
0
1
0
2 3 4 5 6 7 8 9 1 10 11 12 13 14 15 16 17 18 19 20 21 22 Day
FC:17
FC:1A
FC:19
FC:18
lapsed days
total days
FC No. Data
Floor drying
FIX
TOSHIBA I 21 TOSHIBA I 21
Floor drying program
• This function is only available with the master remote control.
• This function is used for drying
concrete .
•
Service personnel must operate the unit after setting the corresponding function code.
• Operation does not start until all corresponding function codes have been set.
•
Note the following settings.
Please consult the person responsible for the installation.
Improper setup can cause a crack in the concrete, etc.
• Once operation starts, the unit works as follows:
Press the [ ] and [ ] buttons at the same time for at least
4 seconds or longer on the top screen in order to access the
"FIELD SETTING MENU" menu item.
Press the [ ] / [ ] buttons to select "Floor bake-out program"
in the FIELD SETTING MENU. Then press [ ] for
4 seconds or longer.
FC:14 Start and end temperature setting [20-55°C]
FC:15 Maximum temperature setting [20-55°C]
FC:16 Continuous days for each step up to maximum temperature [1-7 days]
FC:17 Temperature difference for each step up to maximum temperature [1-10 K]
FC:18 Continuous days for each step up to end temperature [1-7 days]
FC:19 Temperature difference for each step up to end temperature [1-10 K]
FC:1A Continuous days at maximum temperature [1-30 days]
Press [ ] / [ ] to select the FC number or data,
then press the [
] / [ ] buttons to set the values.
Press [
]. The set values are saved.
FLOOR BAKE-OUT PROGRAM