Toshiba ES9455 MFP, Copying Manual, Page: 147 / 208

4.EDITING FUNCTIONS
Outside Erase 145
4 EDITING FUNCTIONS
4
Set “outside erase”.
1) Press [ON].
2) Adjust the width of the border around the original by pressing either
or as required.
When you adjust it to the side, the area to be detected as not belonging to the original is widened.
When you adjust it to the side, the area to be detected as not belonging to the original is narrowed.
3) Press [OK].
Do not place any heavy objects (4 kg (9 lb.) or over) on the original glass and do not press on it with
force.
Breaking the glass could injure you.
6
Select other copy modes as required, and then press the [START] button on the control
panel.
5
Place the original on the original glass.
Press [ZOOM] and set the size of the original.
P.66 “Specifying both the original size and the copy paper size
separately”
y When placing the original, be sure that the Original Cover or the
RADF is fully raised. If not, this function may not properly be
able to detect the border between the original and areas not
belonging to it.
y Do not directly look at the original glass during copying since an
intense light may leak.