manualshive.com logo in svg

Toshiba ES9455 MFP, Copying Manual, Page: 39 / 208

Share
Download
Toshiba ES9455 MFP Copying Manual Download Page 39

2.HOW TO MAKE COPIES

Making Copies    37

2 HOW TO MAKE COPIES

„

Interrupting copying and making other copies

You can interrupt the copy job in progress to make other copies (interrupt copying). When restarting the interrupted job, 
you do not have to reselect copy modes that have been set because they are memorized in this equipment.

y

The following functions cannot be used together with interrupt copying:
Cover sheet copying, Sheet insertion copying, Job build, Store to e-Filing, Copy & File

y

During interrupt copying, the mode cannot be changed to a non-copying one, such as e-Filing, scanning, printing or 
fax. To change the mode, first press the [INTERRUPT] button to clear the interrupt copying.

2

Replace the original with a new one.

3

Select other copy modes as required and then press the [START] button on the control 
panel.

4

Press the [INTERRUPT] button again after the interrupt copying has finished.

“Ready to resume job 1” appears and the interrupted job restarts.

1

Press the [INTERRUPT] button on the control panel.

“Job interrupted job 1 saved” appears, and “COPY(Interrupt)” is 
displayed on the function display. 

If the original is being scanned, the message above appears after 
the scanning has finished.

Summary of Contents for ES9455 MFP

















































































































































































































Reviews:

No comments