Toshiba ES9455 MFP, Copying Manual, Page: 47 / 208

2.HOW TO MAKE COPIES
Copying from MPT 45
2 HOW TO MAKE COPIES
y If you select a wrong paper type, this could cause a paper misfeed or significant image trouble.
y
When you select a paper type, you can confirm it with the icons displayed on the equipment status
indication area as shown below.
* These paper types are available only for ES9475 MFP Series.
About “BACK PRINTED”
When making 2-sided copies manually, select a paper type for one side and make a copy of it, and then select the
same paper type and press [PRINTED] under "BACK PRINTED" for the other side.
Example: When making a 2-sided copy on THICK 2 paper
y ES9455 MFP: Automatic 2-sided copying can be applied to plain paper and THICK 1.
y ES9475 MFP Series: Automatic 2-sided copying can be applied to plain paper, recycled paper, THICK 1,
THICK 2, THICK 3, and SPECIAL 1.
y For OHP films (TRANSPARENCY), only 1-sided copying can be performed.
y If thick paper cannot be fed, printing takes a long time after feeding or the quality is poor, turn over the paper
and place it again or place fewer sheets.
There is no affect on the printing quality though noise may occur during paper feeding depending on the paper
type.
Paper type Icon Paper type Icon
PLAIN
—
TRANSPARENCY
PLAIN (BACK PRINTED) RECYCLED PAPER
THIN RECYCLED PAPER (BACK PRINTED)
THIN (BACK PRINTED)
SPECIAL 1
*
THICK 1
SPECIAL 1 (BACK PRINTED)
*
THICK 1 (BACK PRINTED)
SPECIAL 2
*
THICK 2
SPECIAL 2 (BACK PRINTED)
*
THICK 2 (BACK PRINTED)
SPECIAL 3
*
THICK 3
*
SPECIAL 3 (BACK PRINTED)
*
THICK 3 (BACK PRINTED)
* ENVELOPE
THICK 4
* ENVELOPE (BACK PRINTED)
THICK 4 (BACK PRINTED)
*
1. Place paper on the MPT.
2. Select “THICK 2” for the paper type and start copying.
3. Place the paper copied in step 2 on the MPT again with its copied side up.
4. Select "THICK 2" for the paper type and [PRINTED] under "BACK PRINTED", and then start copying.