Toshiba ES9455 MFP, Copying Manual, Page: 68 / 208

3 BASIC COPY MODES
66 Enlargement and Reduction Copying
3
Select the desired paper size, press [AMS] and then [OK].
y If you want to select a paper size other than the following, you need to register the size as “OTHER”. Once
you register this size, it will be specified every time you press [OTHER] on the touch panel.
North America: LD, LG, LT, ST
Other than North America: A3, A4, B4, B5
For how to register, see the following page:
P.67 “Registering paper sizes to “OTHER” size”
y Paper sizes can also be registered by pressing the desired tray button of the equipment status indication
area on the BASIC menu.
4
Place the original(s).
If the original is placed on the original glass, the reproduction ratio is set when the original is placed. If the original
is placed on the RADF, the reproduction ratio is set when the original is scanned.
If “Change direction of original” appears, change it accordingly.
5
Select other copy modes as required, and then press the [START] button on the control
panel.
„
Specifying both the original size and the copy paper size separately
1
Place paper in the tray(s).
2
Place the original(s).