
59
Effect
Reason (Measure)
Spark occurs during cooking.
・
Did you use the square tray? Do not use square tray inside microwave.
・
Did you use metallic container, wire mesh or metallic spits for menus to use
microwave?
・
Metal skewers, containers or metal objects etc. may cause spark.
・
Is the oven dirty? Radio waves tend to converge on the dirt and cause spark.
Please wipe away any dirt. (Page 48, 49)
The temperature in the oven is not
the same as set temperature
・
The temperature is measured by heat electric thermometer on the center
with nothing inside(using JIS measurement method
)
. When measuring using
commercially available oven thermometer, the temperature tracking is slower
compared to JIS' measurement options hence it takes longer to get to the set
temperature.
・
When making meals please use the temperature in the cookbook as a guide.
In some cases, we cannot set the
value over 260℃
・
If the inside is hot, for protection of electric components, oven cannot be set
to be hotter than 260 C and super-heated steam or hybrid cannot be set
above 300 C.
There may be insufficient heating of
the food with microwave heating.
・
If there is a small amount of food or inside temperature is high after continued
use, the output may be stopped to protect the product.It s not a breakdown.
It s stopped during cooking.
・
Did you open the door during heating? Please press the START button after
closing the door
・
Automatic cooking with work required during heating will be notified by the
buzzer sounding 5 times.
Please carry out the operatiohn with the door open and press the START
key after closing the door.
Check the following before calling for service center.
Effect
Reason (Measure)
Microwave does not work.
・
Is the power supply ON?
・
Is the power plug disconnected?
・
Check if the circuit breaker or fuse power is off.
・
Did you open or close the door during cooking and forgot to press START"
Button?
・
Did you perform any key operation while the power supply is off?
(
Once you open the door, power will turn off the 0" is displayed
)
Oven does not heat up on pressing
REHEAT
"
button.
・
Is DOOR" displayed.
If the start key is pressed 1 min after the oven closes, heating will not take
place. (Open and close the door again and press the key.)
It doesn't get heated even if the
REHEAT" button is pressed
NON-FRIED/HYBRID" DEEP TRAY
MENU". Press the QUICK/EASY"
BEVERAGE" buttons. It doesn't
heat up even when START" key is
pressed.
・
Is the [HIGH TEMP.] display ON?
(If the oven temperature is pressing the high, heating may not start in start
key certain menu operation. Open the door, allow the oven to cool, wait for
[HIGH TEMP.] disappear and press the key.)
・
Check if demo mode is ON.
Refer page 57 for DEMO" display instructions.
Buzzer does not work
・
Check if the buzzer function is set to cancel mode.
Refer Buzzer sound settings in (page 47) to change the buzzer settings
Cooking does yield desirable results.
・
Did you follow the instructions properly.
(Check instruction guidelines for the usage of lid, wrap and oven accessories)
・
Did you start cooking when the oven was hot.
(Wait for the oven to cool.)
・
Did you use the appropriate food quantity.
・
Is the top part or bottom part of the oven dirty.
・
Did you select the right menu before cooking.
・
If case you can't cook well, refer (page 53〜56) for guidelines.
START" button does not operate
sometimes.
・
Close the oven door, wait for some time and then start.
(Sometimes the oven does not start immediately after door close to prevent
any malfunction.)
Circuit breaker has tripped
・
Are the electrical appliances used exceeding the household electric capacity
(Contracted capacity A with the power company).
Switch OFF the power supply of other electrical appliances that are not
required. Switch on the circuit breaker and reuse the oven.
Notice
Before asking for repairs
ER-TD5000_Manual_TTEI_p38-61.indd 59
ER-TD5000_Manual_TTEI_p38-61.indd 59
10/3/19 11:10 AM
10/3/19 11:10 AM