Real Time Clock
Problem
Procedure
The BIOS setting
and system date/
time are lost.
The lasting time of the Real Time Clock (RTC) has
run out - you will need to set the date and time in
the BIOS setup utility by using the following steps:
1.
Launch the BIOS setup utility.
Please refer to
TOSHIBA Setup Utility
section
for further information.
2.
Set the date in the
System Date
field.
3.
Set the time in the
System Time
field.
4.
Select
Save and Exit -> Exit Saving
Changes
- a confirmation message will be
displayed.
5.
Select
Yes
- the BIOS setup utility will end
and the computer will restart.
Internal display panel
Apparent computer's display panel problems may be related to the
computer's setup and configuration.
Problem
Procedure
Markings appear on
the computer's
display panel.
These marks may have come from contact with
touch screen. You should try to remove the marks
by gently wiping the display panel with a clean dry
cloth or, if this fails, with a good quality LCD screen
cleaner. In this latter instance you should always
follow the instructions with the screen cleaner and
always ensure you let the display panel dry
properly.
Memory Media Card
For further information, please refer to
Operating Basics
.
Problem
Procedure
Memory media card
error occurs
Remove the memory media card from the
computer and then reinsert it in order to ensure it is
firmly connected.
If the problem persists, then you should refer to the
documentation supplied with your memory media
card for further information.
User's Manual
6-6
