222
DP-1910F
169 DHCP CLIENT
1
Invalid
Select whether the machine would automatically acquire
the Network Parameters from the DHCP Server. (Such
as IP Address, Subnet Mask, Default Gateway IP
Address, etc.)
Note:
If you change the setting of this parameter, the
machine will reboot automatically.
*2
Valid
170 SMTP
AUTHENTI.
*1
Invalid
If you transmit to the SMTP server, the user name and
password are used for authentication. Selecting “2:Valid”
allows you to set up the user name and password.
2
Valid
171 POP BEFORE
SMTP
*1
Invalid
If you transmit to the SMTP server, POP User Name and
POP Password are used for authentication.
2
Valid
172 DIRECT IFAX
XMT
*1
Invalid
Selecting whether to be prompted during Phone Book
registration if the station you are programming is to
receive Internet Fax directly without going through a Mail
Serv
2
Valid
173 DELIVERY
NOTICE
(HOME)
*1
Off
Setting the home position of whether to request a
Message Disposition Notification (MDN) for a delivery
processing confirmation indicating that the message
(Email) was read, when sending an Email/Internet Fax.
This setting will be the default value for the Select Mode
(Function 8-2 (DELIVERY NOTICE)).
2
On
174 APOP
AUTHENTI.
*1
Invalid
This parameter allows you to encrypt the protocol for the
POP password security when connecting with the POP
server.
2
Valid
177 XMT FILE TYPE
1
TIFF
Selecting whether the document(s) are converted to
TIFF-F or PDF format when Scanning-to-Email, or TIFF-
F format when sending to an Internet Fax.
The default is “2:PDF” as PDF has become the industry
standard for exchanging documents from computer to
computer (Scan-to-Email). However, neither PDF format
can be used tor Internet Faxing (Internet Fax to Internet
Fax) as current Internet Fax specifications do not support
these file formats, and TIFF-F format must be used when
sending to an Internet Fax machine.
This setting can be temporarily changed when sending
an Internet Fax with the Select Mode (Fuction 8-6 (FILE
TYPE/NAME)).
*2
184 EMAIL REPORT
*1
OFF
Selecting whether to send the transmission result
notification by Email.
If “NOT FOUND” is displayed on the LCD when
specifying a station, check below.
(1) The registered station name and the character
strings entered when specifying a station are totally
the same, including symbols and space.
(2) The station registered as transmission result
notification is an Email address. G3 FAX station
cannot be used.
Note:
The transmission result notification cannot be sent
to stations registered to use the Direct Internet Fax
feature.
2
ON
186 IPv6
*1
Invalid
Selecting whether to use the IPv6 environment.
2
Valid
No.
Parameter
Setting
Number
Setting
Comments
Summary of Contents for e-studio191f
Page 22: ...22 DP 1910F 1 2 Control Panel For USA and Canada TOSHIBA DP 1910F ...
Page 225: ...225 DP 1910F memo ...
Page 226: ......