Toshiba e-studio191f, Service Manual

Page: 165 / 226

165
DP-1910F
022 SIG. INTERVAL 1 = 100 ms
2 = 200 ms
3 = 500 ms Selects the time interval between the receiving signal
and the transmitting signal.
023 TCF CHECK 1 = Normal (Short)
2 = Long Selects the TCF check interval Long/Short
024 CED FREQ. 1 = 1080 Hz (non ITU-T)
2 = 2100 Hz Selects the CED frequency 2100/1080 Hz
025 COMM. START-
UP 1 = First
2 = Second Selects the communication start-up condition (XMT
and Polling).
(Used when Echo Suppression is disabled.)
026 NON-
STANDARD 1 = Off (Invalid)
2 = On (Valid) Selects own mode.
027 SHORT
PROTOCOL B 1 = Off (Invalid)
2 = On (Valid)
Selects the short protocol mode.
028 SHORT
PROTOCOL D 1 = Off (Invalid)
2 = On (Valid)
Selects the short protocol mode. When activated, it
allows the machine to automatically store the modem
speed for each Auto Dial Number.
029 REMOTE DIAG. 1 = Off (will not accept)
2 = On (accepts)
Selects whether the machine accepts Remote
Diagnostics from the service station.
030 CED & 300 bps 1 = 75 ms
2 = 1 sec
Selects the pause interval between the CED and the
300 bps signal.
(Used when Echo Suppression is disabled.)
031 RTC = EOL x 12 1 = Off (EOLx6)
2 = On (EOLx12)
Selects the RTC signal, EOLx6 or EOLx12.
032 V34 TX START 2400-33600bps Selects the transmission modem start speed for V.34
communication, 33600-2400 bps.
(Press the
“ ” , “ ” keys to select the symbol rate.)
033 V34 RX START 2400-33600bps Selects the receiving modem start speed for V.34
communication, 33600-2400 bps.
(Press the
“ ” , “ ” keys to select the symbol rate.)
034 V34 TX SR 2400-3429sr Selects the transmission symbol rate for V.34, 3429/
3200/3000/2800/2400 sr.
(Press the
“ ” , “ ” keys to select the symbol rate.)
035 V34 RX SR 2400-3429sr Selects receiving symbol rate for V.34, 3429/3200/
3000/2800/2400 sr.
(Press the
“ ” , “ ” keys to select the symbol rate.)
036 Not Used
037 PROTOCOL
DISDPLAY 1 = Off (not displayed)
2 = On (displayed)
Selects whether to display the modem speed during
communication.
(Press the Job Status Key to display)
038 Not Used
039 FLASH TIME 5 = 50 ms
~
100 = 1000 ms
Selects the pause interval before activating the Flash
key.
040 FLASH TIME
(PSTN) 5 = 50 ms
~
100 = 1000 ms
Selects the pause interval before activating the Flash
key.
(For Germany, Austria and Czech)
041 PAUSE TIME 1 = 1 sec.
~
10 = 10 sec.
Selects the pause interval from 1 sec. ~ 10 sec. for
dialing through a switchboard or for international
calls.
042 Not Used
Function Parameter Table
No. Parameter Selections Function