127
DP-1910F
LCD 1: [TONER IS RUNNING LOW: U13]
Low Toner sensor detects Low Toner or the machine has printed
11,000 pages
.
Preparing a new cartridge for replacement is recommended.
LCD 2: [WARNING TONER LOW LESS THAN 50 PAGES]
450 pages have been printed since the LCD 1 appeared.
Replacement with the new cartridge is recommended.
LCD 3: [OUT OF TONER: E13]
50 pages have been printed after LCD 2 appeared.
Replace with the new cartridge.
When replacing with a New Cartridge, refer to the Operating Instructions (For Facsimile).
4.7.2.
Jam Error Codes (J Code)
Section
Jam Location
A
ADF
B
Paper Transport / Exit Area
C
Paper Entry Area
Jam Error Codes (J Codes) Table
Code
Contents
Section
J01
The Registration Sensor did not detect paper within a predetermined time after the Paper
Feed Roller started rotating. (1st Feeder Unit)
C
J02
The Registration Sensor does not detect paper within a predetermined time after the
Paper Feed Roller started rotating. (2nd Feeder Unit)
J43
Paper Jam in the Registration Sensor or Paper Path Sensor.
B, C
J44
Paper Jam in the
Paper Exit
Sensor.
J71
Original was longer than
39.3 in (1m)
.
(Information Code
031
is printed on the Transaction Journal instead.)
A
J72
Read Point Sensor does not go ON within several seconds after the original starts
feeding.
(Information Code 030 is printed on the Transaction Journal instead.)
J74
The Exit Sensor does not go ON within a predetermined time after the Sensor is
activated.
J75
The Exit Sensor does not go OFF within a predetermined time after the Sensor is
activated.
J92
The Original was pulled out when feeding an original.
J93
The Original remained in the ADF.
J94
The ADF does not go off after the predetermined time.
Unexpected Jam timing (i.e. Original is too short, etc.)
A
B
C
Summary of Contents for e-studio191f
Page 22: ...22 DP 1910F 1 2 Control Panel For USA and Canada TOSHIBA DP 1910F ...
Page 225: ...225 DP 1910F memo ...
Page 226: ......