Toshiba e-studio191f, Service Manual

Page: 218 / 226

218
DP-1910F
082 QUICK MEMORY
XMT
1 Invalid Selecting whether the machine performs Quick Memory
XMT.
Invalid:
Stores all documents into memory first before dialing
the telephone number.
Valid:
Starts dialing the telephone number immediately after
storing the first page.
This feature is not available when the Fax Parameter
No.133 (JOB BUILD) is set to “2:On”.
*2 Valid
088 LINE
SELECTION
*1 Auto Selecting the transmitting telephone line when the
optional G3 Communication Port Kit is installed.
Auto:
Selects the available telephone line for transmission
automatically.
Line-1:
Selects Line-1 as the only transmitting telephone line.
Line-2:
Selects Line-2 as the only transmitting telephone line.
Note: Regardless of the setting selection above, the unit
will answer and receive on both telephone lines.
2 Line-1
3 Line-2
097 SPECIAL TRAY
No.1
*1 None Select a Special Tray that will not be used for printing
received faxes (Tray 1 or 2 ). One Tray must always be
available for receiving faxes. This setting is available
when the optional 2nd Paper Feed Module is installed.
2 Tray 1
3 Tray 2
099 MEMORY SIZE - - Displays the amount of Memory size.
117 MULTI STATION 1 Invalid Selecting whether the machine allows sending the
document to multiple destinations. If the setting is
“1:Invalid”, the document can be sent to a single
destination only.
*2 Valid
118 FAX FUNC.
DETECT
1 Invalid Setting the number of digits required to determine the
entered number is a Fax Telephone Number.
Upon detecting the specified number of digits, the
machine will automatically switch to the Fax Mode when
it is in the Copier Mode.
2 4-Digits
3 5-Digits
*4 6-Digits
5 7-Digits
6 8-Digits
119 QWERTY
KEYBOARD
1 One-Touch Selecting whether the QWERTY Keyboard functions as a
One-Touch Dialing Keys or as Quick Name Search Keys
of the station name.
One-Touch:
Each key (1~40) is assigned with an Email Address or
a Telephone Number for quick dialing.
Quick Name Search:
Entering the first letter of the station. Search name for
quick name search of the programmed station and
quick dialing.
*2 Quick Name
Search
No. Parameter
Setting
Number
Setting Comments