Toshiba e-studio191f, Service Manual

Page: 213 / 226

213
DP-1910F
8.4. Error Message
8.4.1. Error Message Sent to the Sender
Error messages that are emailed from your machine to the original sender during remote programming of
the Auto Dialer via email.
8.4.2. Internet Fax Return Receipt Error Messages
Error messages that are printed on the Internet Fax Return Receipt when remote programming of the Auto
Dialer via Email fails.
Error Message Possible Cause / Action
1 554 Data Transfer Error (broken Header) The header or sub header decoding is being processed
while the message finished, try again.
2 554 Data Transfer Error (broken Data) Multiple contents are present and being processed while
the message finished, try again.
3 554 Data Transfer Error (FAX module) Data transfer error occurred in the FAX module while
communicating with the LAN module, try again.
4 554 MIME attachment not supported
(message/file)
MIME attachment is not supported during this operation,
resend using plain text in the message body only.
5 554 MIME format not supported MIME file type is not supported, resend using plain text in
the message body only.
6 554 G3 Relay permission denied The requested domain for Relayed Transmission is not
registered.
7 554 Relay Address unknown The telephone number of end receiving station for the
Relayed Transmission is unknown.
8 554 Memory Full (FAX module) FAX Memory is full, try again later.
9 554 Data Transfer Error Other errors not listed above, try again later.
Error Message Possible Cause / Action
1 Format Error : <@command block, the
“@end” command is missing.>
The block termination command “@end” is missing in the
“@command” block, add the “@end” command and try
again.
2 Format Error : <@begin block, the
“@begin” command is missing.>
The block start command “@begin” is missing in the
“@begin” block, add the “@begin” command and try again.
3 Format Error : <@begin block, the
“@end” command is missing.>
The block termination command “@end” is missing in the
“@begin” block, add the “@end” command and try again.
4 Format Error : <@system block, the
“@end” command is missing.>
The block termination command “@end” is missing in the
“@system” block, add the “@end” command and try again.
5 Format Error : <@sender block, the
“@end” command is missing.>
The block termination command “@end” is missing in the
“@sender” block, add the “@end” command and try again.
6 Format Error :<@domain block, the
“@end” command is missing.>
The block termination command “@end” is missing in the
“@domain” block, add the “@end” command and try again.
7 Format Error : <@program block, the
“@end” command is missing.>
The block termination command “@end” is missing in the
“@program” block, add the “@end” command and try again.
8 Format Error : <@system block, the
“@system” command is missing.>
The system block start command “@system” is missing in
the “@system” block, add the “@system” command and try
again.
9 Permission denied : <054 Fax
Forward parameter is set to “Valid”.>
Set the Fax Forward parameter to “Invalid”.
10 Permission denied : <Fax machine is
busy performing a task.>
Try again later when the machine is not busy.