Toshiba e-STUDIO A Series Operator'S Manual Download Page 24

Page: 24 / 108

3.Setting the IP Fax Function

24 Setting the IP Fax Function from TopAccess

Registrar Server Setting -
Primary

When the settings are specified for both [Primary] and [Secondary] in
[Registrar Server Setting], those for [Primary] are used.

Connection Status

— Displays the last connection status.



(Blank)

— A server address is not specified.



Registered

— The IP address or the host name of the SIP server has been

registered.



Available

— The IP address or the host name of the SIP server to be used

can be registered; however, another server has been connected.



Failed

— The registration of the IP address or the host name of the SIP

server to be used has failed.

Server IP Address *

— Enters the host name or the IP address of a primary

registrar. You can enter up to 128 characters. This will not be displayed if
[Auto] or [Auto(DHCPv6)] has been selected in Address Mode.

Port Number

— Enters the port number for sending packets to a primary

registrar. You can enter a value in the range from 1 to 65535. Generally the
default value “5060” is used.

User Name

— Enters a user name to be authenticated in a primary registrar.

You can enter up to 64 characters.

Password

— Enters a password to be authenticated in a primary registrar.

You can enter up to 64 characters.

Retype Password

— Enters the same password again for a confirmation.

Registrar Server Setting -
Secondary

When a primary registrar cannot be used, a secondary one will be utilized.

Connection Status

— Displays the last connection status.



(Blank)

— A server address is not specified.



Registered

— The IP address or the host name of the SIP server has been

registered.



Available

— The IP address or the host name of the SIP server to be used

can be registered; however, another server has been connected.



Failed

— The registration of the IP address or the host name of the SIP

server to be used has failed.

Server IP Address *

— Enters the host name or the IP address of a

secondary registrar. You can enter up to 128 characters. This will not be
displayed if [Auto] or [Auto(DHCPv6)] has been selected in Address Mode.

Port Number

— Enters the port number for sending packets to a secondary

registrar. You can enter a value in the range from 1 to 65535. Generally the
default value “5060” is used.

User Name

— Enters a user name to be authenticated in a secondary

registrar. You can enter up to 64 characters.

Password

— Enters a password to be authenticated in a secondary

registrar.
You can enter up to 64 characters.

Retype Password

— Enters the same password again for a confirmation.

Item name

Description

Summary of Contents for e-STUDIO A Series












































































































Search results

Summary of Contents for e-STUDIO A Series

Reviews:

Related manuals for e-STUDIO A Series

Brands by name

Popular brands

Toshiba e-STUDIO A Series, Operator'S Manual

Search results

Summary of Contents for e-STUDIO A Series

Reviews:

Related manuals for e-STUDIO A Series

Brands by name

Popular brands