Toshiba E-studio 281c, Printing Manual

Page: 306 / 382

6 Printing from Macintosh
304 Printing from Application on Mac OS X 10.2.4 to Mac OS X 10.4.x
When the optional expansion memory is not installed, the job will not be printed if you select
“Color High-res General”, “Color High-res Photo”, Color High-res Presentation”, “Color High-
res LineArt”, or “Color High-res Transparency”.
2) Pure Black and Gray
Select whether printing the document in gray scale.
- Off — Select this to print the document in color mode.
- Pure Black only — Select this to print the contents in black where the percentage of all
colors (cyan, magenta, and yellow) is 100%.
- Pure Black and Pure Gray — Select this to print the contents in black where the per-
centage of all color —cyan, magenta, and yellow— is 100% (C=100% -> K=100%,
M=100% -> K=100%, Y=100% -> K=100%), and print the contents in gray scale where
the percentage of each color —cyan, magenta, and yellow— is the same percentage
(C=M=Y=n% -> K=n%).
3) Black Over Print
Select this when printing background content that has black text overlayed on it. If this is not
enabled, the background of the black content will not print. When you print a document that
has any of its content on background with black text overlayed, enable this option.
4) Smoothing
Select whether printing the texts and graphics smoothly.
5) Toner Save
Select this to print in the toner save mode.
— Finishing
In the Finishing menu, you can set destination, hole punching and stapling.
1) Destination
This selects the destination tray.
- Printer’s Default — Select this to route the output to the default tray (that is set as the
default tray for raw job in the Printer setting page of TopAccess Administrator’s page).
- Inner Tray — Select this to route the output to the inner tray.
- Tray 1 — Select this to route the output to the upper tray of the Finisher.
- Tray 2 — Select this to route the output to the lower tray of the Finisher.
1
2
3