manualshive.com logo in svg

Toshiba E-studio 281c, Printing Manual

Share
Download
Toshiba E-studio 281c Printing Manual Download Page 22

2 Installing Client Software for Windows

20    About the Installation

About the Installation

About Client Software for Windows

Printer Drivers

Printer drivers are software components that enable application programs to interact with the 
printer. The e-STUDIO451c Series comes with two printer drivers, PCL6, PCL5c, and PSL3 
(PostScript) printer drivers.  These printer drivers offer document print, layout and assembly 
functions that are not available with many applications.

Font Manager

This utility allows you to install and manage the TrueType fonts that are corresponding to the 
internal PS fonts on the equipment.

Planning for Installation

This section will help you to plan an installation suited to your environment.  Before installing the 
client software, read this section.

Before Installing Client Software

Before installing the client software, confirm the followings to perform an appropriate installation.

— When Same Printer Drivers Have Been Installed Previously

Before updating the printer drivers, please delete the existing printer drivers.

Type of Printer Drivers

y

PCL6 Printer Driver

 — for printing documents from general applications such as Microsoft 

Office.

y

PCL5c Printer Driver

 — for printing color documents from general applications such as a 

Microsoft Word.

y

PSL3 Printer Driver

 — for printing documents from graphical application such as Adobe 

Illustrator as well as general applications such as Microsoft Office.

System Requirements

To install the printer drivers and other client software on a Windows workstation, the following is 
required.

y

Display Resolution

1024 x 768 dots or more

y

Display Color

High Color (16bit) or higher is recommended

y

CPU

Pentium 133 MHz minimum (Pentium 266 MHz or faster recommended)

y

Memory

The required memory size for OS.

The applicable computers depend on the printing systems:

Summary of Contents for E-studio 281c































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands