Toshiba e-Studio 202S Operator'S Manual For Basic Function Download Page 56 | Manualshive

Page: 56 / 74

background image

54

STATUS INDICATORS

When the following indicators light up or blink on the operation panel or the following
alphanumeric codes appear in the display, solve the problem immediately referring
to both the table below and the relevant page.

Be sure to use only genuine TOSHIBA parts and supplies.

Indication

Cause and remedy

Page

Developer
replacement
required indicator

Steadily lit

Developer is required. Contact your authorized
service representative as soon as possible.

Toner cartridge
replacement
required indicator

Steadily lit

Replacement of toner cartridge will be needed
soon. Prepare a new cartridge.

Blinking

Toner cartridge must be replaced. Replace it with
a new one.

Misfeed indicator Blinking

A misfeed has occurred. Remove the misfed paper
referring to the description of "MISFEED REMOVAL".

The lower side cover may be open. If so, close it.

Maintenance
indicator

Steadily lit

Service by an authorized TOSHIBA service
technician is required.

ADF misfeed
indicator

Steadily lit When the document feeder cover is open.

–

Blinking

An original misfeed has occurred in the ADF. Remove
the misfed originals referring to the description of "E:
Misfeed in the ADF (Peripheral device)".

Power save indicator is
steadily lit.

The unit is in the preheat mode. Press any key to
cancel the preheat mode.

The unit is in the auto power shut-off mode. Press
the start (

) key to cancel the auto power shut-

off mode.

The paper tray indicator is
blinking.

The paper tray is not pushed in correctly, or there
is no paper in the tray. Push the tray all the way
in or load paper in the tray.

–

"CH" is blinking in the display.

The toner cartridge is not installed. Check if the
cartridge is installed.

"CH" is steadily lit in the
display.

Side cover is open. Close the side cover securely
by pressing the round projections near the side
cover open button.

–

"OP" is blinking in the display.

This appears if it is detected that the original
cover/ADF is open when copying is started.
Completely close the original cover/ADF, or
press the start (

) key again.

Depending on the color and the density of the
original, "OP" blinking may appear even when
the original cover/ADF is closed. In such a case,
press the start key again to make a copy.

–

"P" is blinking in the display.

The paper tray or multi-bypass tray is empty. Load paper. 12, 14

A misfeed has occurred in the paper tray or
multi-bypass tray. Remove the misfed paper.

«
...
54
55
56
57
58
...
»

Summary of Contents for e-Studio 202S











































































Reviews:

No comments

Related manuals for e-Studio 202S

Brand: Samsung Pages: 165

Brand: Samsung Pages: 2

Inkjet SCX-1150F

Brand: Samsung Pages: 66

Brand: Samsung Pages: 155

CLX-3170FN series

Brand: Samsung Pages: 220

CLX 6210FX - Color Laser - All-in-One

Brand: Samsung Pages: 36

CLX-3160 Series

Brand: Samsung Pages: 139

Brand: Samsung Pages: 8

Lazett Combo SCX-4016

Brand: Samsung Pages: 2

Brand: Samsung Pages: 319

Brand: Unitech Pages: 2

Brand: Nantian Electronics Pages: 4

Brand: Oki Pages: 147

Brand: Oki Pages: 12

Brand: Oki Pages: 297

Brand: Oki Pages: 111

Brand: Oki Pages: 6

Brand: Oki Pages: 2

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands