60
IF A PAPER MISFEED OCCURS IN THE MAIN UNIT
WHILE USING THE ADF (Peripheral device)
If a paper misfeed occurs in the main unit paper path when making copies with
original(s) through the ADF, the ADF will automatically stop scanning. Manually
remove the misfed paper(s) in the main unit. You can check the number of originals
that must be returned to the document feeder tray in the display on the operation
panel. Follow the steps below to display the number of originals to be returned.
1
When a paper misfeed occurs in the
main unit, the ADF stops and the
ZOOM indicator blinks.
The remaining number of sets will blink in the
display.
Be sure to remove misfed paper(s) at the main
unit paper path first. Then follow the step 2
onwards.
2
Remove any originals that have not yet
been scanned from the document
feeder tray.
For the original(s) stuck in the ADF, do not
remove manually. This may cause a machine
malfunction. See the step 3.
3
Press the copy ratio display (%) key.
The originals that were being scanned in the
ADF will be discharged and the number of
original sheets to be returned will blink in the
display.
Place the displayed number of original sheets
back in the document feeder tray together with
the original sheets removed in step 2.
The following procedure omits removal of the misfeed. Be sure to
remove the misfeed before displaying the number of originals to be
returned. For the misfeed removal procedure, see "MISFEED
REMOVAL" (p.55).
If "ADF automatic original discharge time" is enabled in the user
programs, the originals in the ADF will be automatically discharged after
the set time elapses. ("USER PROGRAMS" (p.46))
Display of number of original
sheets to be returned
