manualshive.com logo in svg

Toshiba e-studio 2000ac, Copying Manual

Share
Download
Toshiba e-studio 2000ac Copying Manual Download Page 3

Preface    3

Preface

Thank you for purchasing TOSHIBA Multifunctional Digital Systems or Multifunctional Digital Color Systems. 
This manual describes how to use the copying functions of this equipment.
Read this manual before using the functions.

How to read this manual

Symbols in this manual

In this manual, some important items are described with the symbols shown below. Be sure to read these items 
before using this equipment.

Description of original/paper direction

Paper or originals of A4, B5 or LT size can be placed either in a portrait direction or in a landscape direction. In this 
manual, “-R” is added to this paper size when this size of paper or original is placed in a landscape direction.

e.g.) A4 size original on the original glass

Paper or originals of A3, B4, LD or LG can only be placed in a landscape direction, therefore “-R” is not added to these 
sizes.

Indicates a potentially hazardous situation which, if not avoided, could result in death, serious 
injury, or serious damage, or fire in the equipment or surrounding objects.

Indicates a potentially hazardous situation which, if not avoided, may result in minor or 
moderate injury, partial damage to the equipment or surrounding objects, or loss of data.

Indicates information to which you should pay attention when operating the equipment.

Describes handy information that is useful to know when operating the equipment.

Pages describing items related to what you are currently doing. See these pages as required.

Placed in a portrait direction: A4

Placed in a landscape direction: A4-R

Summary of Contents for e-studio 2000ac





































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands