Toshiba e-studio 2000ac Copying Manual Download Page 108

Page: 108 / 132

108 Adjusting RGB (Color Model only)

Adjusting RGB (Color Model only)

This function allows you to adjust the overall color balance of the copied image by changing the strength of Red (R),
Green (G) and Blue (B). This function is available in the full color mode or the auto color mode.

Press [RGB Adjustment] in the Image menu.

Press

of the color to obtain the desired color balance, and then press [OK].



Canceling RGB adjustment



Move the indicator of the color whose adjustment you want to cancel to the middle, and then press [OK].



If you want to cancel the adjustment of all colors, press [Reset], and then [OK].

Red (R)

Green (G)

Blue (B)

Summary of Contents for e-studio 2000ac




































































































































Search results

Summary of Contents for e-studio 2000ac

Reviews:

Related manuals for e-studio 2000ac

Brands by name

Popular brands

Toshiba e-studio 2000ac, Copying Manual

Search results

Summary of Contents for e-studio 2000ac

Reviews:

Related manuals for e-studio 2000ac

Brands by name

Popular brands