dynadock™ User’s Manual
21
3
Plug the square end of the USB cable into the USB upstream
port on the back of the dynadock.
(Sample Illustration) Connecting the USB cable to the dynadock
4
Plug the other end of the USB cable into an available USB 2.0
port on your computer.
(Sample Illustration) Connecting the USB cable to your computer
Be sure to remember which USB port is used during the driver
installation and always plug the dynadock into the same USB port,
otherwise the Windows
®
operating system will treat the dynadock as a
new device and ask to install the drivers again. Only one dynadock can
be operated on one computer at a time.
NOTE
