Toshiba D-VR16SB, Owner'S Manual

Page: 62 / 73

Recording
62 EN
Setting disc protection
To prevent accidental over-recording, editing or erasing
of recordings, you can protect them using the Setup
menu.
1
Insert a recordable disc.
In stop mode, press [SETUP].
2
Select “Disc” using [ K / L ], then press
[ENTER].
Disc menu will appear.
3
Select “Disc Protect OFF ON” using [ K / L ],
then press [ENTER].
Confirmation window will appear.
4
Select “Yes” using [
K
/
L
], then press
[ENTER].
The disc is protected.
Start
Disc
Finalise
Disc Protect OFF ON
Format
No
Yes
Disc Protect OFF ON
Notes
• The Disc Protect setting is available only when a disc recorded in VR mode
is inserted.
• You can select only “Disc Protect ON OFF” when a protected disc is
inserted.
To cancel the disc protection:
• Select “Disc Protect ON OFF” at step 3, then select “Yes”.
• If you insert a disc protected with this unit, “Disc Protect ON OFF” will
appear instead of “OFF ON”.
No
Yes
Disc Protect ON OFF
05̲Recording̲BD.indd 62 05̲Recording̲BD.indd 62 2006/03/24 14:37:48 2006/03/24 14:37:48