Toshiba D-VR16SB, Owner'S Manual

Page: 61 / 73

Recording
61 EN
Recording
Playback
Editing
Introduction
Connections
Basic Setup
Function Setup
Others
VCR Functions
Dubbing Mode
You can copy a DVD disc to a videotape or copy a
videotape to a DVD disc. This function will be
available only if the DVD disc or the tape is not copy
protected. Before starting this function, prepare for the
recording on the DVD-R/RW disc or the videotape.
See pages 38 and 128.
Note for recording to a tape:
• The tape’s record tab is intact.
• The videotape is long enough to record the DVD disc.
Note for recording to a disc:
• The DVD disc is appropriate for the recording status.
See pages 10 and 38.
Insert a disc and a tape with a record tab.
1) In stop mode, press [SETUP].
2) Select “Recording” using [ K / L ], then press
[ENTER].
3) Select “Dubbing Mode” using [
K / L
], then
press [ENTER].
Option window will appear.
4) Select “VCR DVD” using [ K
/
L ], then press
[ENTER].
5) Press [SETUP] to exit the setup menu.
6) Press [DVD].
Make sure to select a recording mode using
[REC MODE]. (See page 38.)
7) Press [VCR ].
8) Press [ B (PLAY)] (VCR) on the unit, and then
press [PAUSE F ] at the point you wish to start
recording.
9) Press [DUBBING].
VCR to DVD duplication will start.
10)Press [STOP C ] to stop the recording.
Dubbing Mode
DVD VCR
VCR DVD
VCR DVD
Dubbing Mode
VCR to DVD
Note For VCR to DVD duplication:
• After starting VCR to DVD duplication, the picture may be
distorted because of the auto tracking function. This is not
a malfunction. Be advised to play back the tape until the
picture is stabilized, then set the starting point which you
wish to start recording, and start VCR to DVD duplication.
• This unit will automatically stop the duplication if playback
with no image detected for more than 3 minutes during
VCR to DVD duplication.
• If the playback sound mode of VCR is set to “STEREO,”
“LEFT” or “RIGHT,” the sound mode upon dubbing is
automatically switched to “STEREO.” If the playback
sound mode is set to “MONO,” the sound mode upon
dubbing is also “MONO.”
• If you set “External input Audio” to “Stereo,” the sound is
recorded in “Stereo” (both Video mode and VR mode).
• While in video mode, if you set “External input Audio” to
“Bilingual,” the audio set in “Bilingual Recording Audio”
mode is recorded.
• While in VR mode, if you set “External input Audio” to
“Bilingual,” bilingual audio is recorded.
The main and sub audio will be simultaneously recorded
(VR mode). You can select audio modes during playback.
4) Select “DVD VCR” using [ K / L ], then press
[ENTER].
5) Press [SETUP] to exit the setup menu.
6) Press [VCR].
Make sure to select a recording mode using
[REC MODE]. (See page 128.)
7) Press [DVD].
8) Press [ B (PLAY)] (DVD) on the unit, and then
press [PAUSE
F
] at the point you wish to start
recording.
9) Press [DUBBING].
DVD to VCR duplication will start.
10)Press [STOP
C
] to stop the recording.
Notes
• When you turn off the unit after setting the Dubbing Mode
to “DVD VCR”, the setting will be set to “VCR DVD”
automatically.
• Dubbing Mode is available only if the tape or disc is not
copy protected.
• You cannot change the output mode during VCR to DVD
or DVD to VCR duplication.
DVD to VCR
Dubbing Mode
VCR DVD
VCR DVD
DVD VCR
05̲Recording̲BD.indd 61 05̲Recording̲BD.indd 61 2006/03/24 14:37:48 2006/03/24 14:37:48