Toshiba BU406M Instruction Manual Download Page 9

Page: 9 / 67

8 / 65

D4223121B

www.toshiba-teli.co.jp

●

Do not expose the camera's image-pickup-plane to sunlight or other intense light directly

Its inner CMOS sensor might be damaged.

●

Occurrence of moiré

If you shoot thin stripe patterns, moiré patterns (interference fringes) may appear. This is not a malfunction.

●

Occurrence of noise on the screen

If an intense magnetic or electromagnetic field is generated near the camera or connection cable, noise may

be generated on the screen. If this occurs, move the camera or the cable.

●

Handling of the protective cap

If the camera is not in use, attach the lens cap to the camera to protect the image pickup surface.

●

If the equipment is not to be used for a long duration

Turn off power to the camera for safety.

●

Maintenance

Turn off power to the equipment and wipe it with a dry cloth.

If it becomes severely contaminated, gently wipe the affected areas with a soft cloth dampened with diluted

neutral detergent. Never use alcohol, benzene, thinner, or other chemicals because such chemicals may

damage or discolor the paint and indications.

If the image pickup surface becomes dusty, contaminated, or scratched, consult your sales representative.

Summary of Contents for BU406M



































































Search results

Summary of Contents for BU406M

Reviews:

Related manuals for BU406M

Brands by name

Popular brands

Toshiba BU406M, Instruction Manual

Search results

Summary of Contents for BU406M

Reviews:

Related manuals for BU406M

Brands by name

Popular brands