manualshive.com logo in svg

Toshiba A7-ST7711, User Manual

Share
Download
Toshiba A7-ST7711 User Manual Download Page 55

55

Getting Started

Adding memory (optional)

5.375 x 8.375 ver 2.3

Installing a memory module with the computer’s power on may 
damage the computer, the module, or both.

The computer has two memory slots—Slot A and Slot B. You 
can install one or two memory modules.

Before you install or remove a memory module, turn off the 
computer using the Start menu. If you install or remove a 
memory module while the computer is in Standby or 
Hibernation mode, data will be lost.

If the computer is on, begin at step 

1

; otherwise, skip to step 

3

.

1

Click 

Start

, and then

 Turn off computer

 or 

Shut Down

 

(depending on the system).

The Turn off computer or Shut Down window appears.

2

Click 

Turn Off

 or 

Shut Down

.

The operating system turns off the computer.

3

Unplug and remove any cables connected to the 
computer, including the AC adaptor.

4

Remove the main battery. For information on removing 
the main battery, see 

“Removing the battery from the 

computer” on page 129

.

Summary of Contents for A7-ST7711




















































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands