background image

5

5.375 x 8.375 ver 2.3

decimal point (e.g., 03 is a REN of 0.3). For earlier products, the REN is 
separately shown on the label. 

Connection to party line service is subject to state tariffs. Contact the state public 
utility commission, public service commission or corporation commission for 
information.

Telephone Company Procedures

The goal of the telephone company is to provide you with the best service it can. 
In order to do this, it may occasionally be necessary for them to make changes in 
their equipment, operations or procedures. If these changes might affect your 
service or the operation of your equipment, the telephone company will give you 
notice, in writing, to allow you to make any changes necessary to maintain 
uninterrupted service.

If Problems Arise

If this equipment causes harm to the telephone network, the telephone company 
will notify you in advance that temporary discontinuance of service may be 
required. But if advanced notice is not practical, the telephone company will 
notify the customer as soon as possible. Also, you will be advised of your right to 
file a complaint with the FCC if you believe it is necessary. 

If trouble is experienced with this equipment, for repair or limited warranty 
information, please contact Toshiba Corporation, Toshiba America Information 
Systems, Inc. or an authorized representative of Toshiba, or the Toshiba Support 
Centre within the United States at (800) 457-7777 or Outside the United States at 
(949) 859-4273. If the equipment is causing harm to the telephone network, the 
telephone company may request that you disconnect the equipment until the 
problem is resolved. 

Disconnection

If you should ever decide to permanently disconnect your modem from its 
present line, please call the telephone company and let them know of this change.

Fax Branding

The Telephone Consumer Protection Act of 1991 makes it unlawful for any 
person to use a computer or other electronic device, including Fax machines, to 
send any message unless such message clearly contains in a margin at the top or 
bottom of each transmitted page or on the first page of the transmission, the date 
and time it is sent and an identification of the business or other entity, or other 
individual sending the message and the telephone number of the sending 
machine or such business, other entity, or individual. (The telephone number 

Summary of Contents for A7-ST7711




















































































































































































































































































































Reviews: