manualshive.com logo in svg

Toshiba A200-EZ2204X - Satellite Pro - Core 2 Duo GHz, User Manual

The Toshiba A200-EZ2204X - Satellite Pro - Core 2 Duo GHz is a powerful and reliable laptop that offers smooth performance. To ensure that you make the most out of its features, you can easily download the free User Manual from our website. Get all the necessary guidance to maximize your laptop's capabilities at manualshive.com.

Share
Download
background image

44

Getting Started

Charging the main battery

The computer’s main battery light gives you an indication of 
the main battery’s current charge:

❖

Glows amber while the main battery is being charged (AC 
adaptor connected)

❖

Glows blue when the main battery is fully charged

❖

Is unlit when the main battery has discharged, the battery 
is not charging, or the AC adaptor is not plugged into the 
computer or AC outlet

❖

Flashes amber when the main battery charge is low and it 
is time to recharge the main battery or plug in the AC 
adaptor

If the AC power light flashes amber during charging, either the main 
battery is malfunctioning, or it is not receiving correct input from the 
AC power supply.

Disconnect the AC power cord/cable and remove the main battery 
pack. See 

“Changing the main battery” on page 106

 for information 

on replacing the main battery.

Charging the main battery

Your computer came with its battery already installed. Before using 
the battery to power the computer, you must charge the battery.

To charge the battery, leave the computer plugged into an AC power 
source with the computer turned off until the battery lights glows 
blue. After that, the battery will be completely charged and ready to 
power the computer.

Once the battery is charged for the first time, avoid leaving the 
computer plugged in and turned off for more than a few hours at a 
time. Continuing to charge a fully charged battery can damage the 
battery.

TECHNICAL NOTE: The recharging of the battery cannot occur when 
your computer is using all of the power provided by the AC adaptor 
to run applications, features, and devices. Your computer’s Power 
Saver utility can be used to select a power level setting that reduces 
the power required for system operation and will allow the battery to 
recharge.

NOTE

Summary of Contents for A200-EZ2204X - Satellite Pro - Core 2 Duo GHz














































































































































































































































Reviews:

No comments

Related manuals for A200-EZ2204X - Satellite Pro - Core 2 Duo GHz

Panasonic Toughbook CF-19KHRAG2M Reference Manual preview
Toughbook CF-19KHRAG2M
Brand: Panasonic Pages: 91
Medion Akoya E4212 Quick Start Manual preview
Akoya E4212
Brand: Medion Pages: 2
MSI GT725-212US Manual preview
GT725-212US
Brand: MSI Pages: 86
Medion Akoya E6222 Instruction Manual preview
Akoya E6222
Brand: Medion Pages: 306
i-Life ZED AIR 2 User Manual preview
ZED AIR 2
Brand: i-Life Pages: 12
Ace MUSTANG W640SR User Manual preview
MUSTANG W640SR
Brand: Ace Pages: 282
Compaq Presario,Presario 1234 Maintenance & Service Manual preview
Presario,Presario 1234
Brand: Compaq Pages: 126
UMAX Technologies Visionbook 13WA PLUS Manual preview
Visionbook 13WA PLUS
Brand: UMAX Technologies Pages: 34
Awood X1 Series User Manual preview
X1 Series
Brand: Awood Pages: 33
Acer C736 User Manual preview
C736
Brand: Acer Pages: 14
Acer A517-51 User Manual preview
A517-51
Brand: Acer Pages: 74
Panasonic CF-VEB274W Operating Instructions preview
CF-VEB274W
Brand: Panasonic Pages: 5
Panasonic CF-VEB342 Operating Instructions Manual preview
CF-VEB342
Brand: Panasonic Pages: 28
Panasonic TOUGHBOOK CF-19KHRJXQV Service Manual preview
TOUGHBOOK CF-19KHRJXQV
Brand: Panasonic Pages: 16
Panasonic CF-VEB341 Operating Instructions Manual preview
CF-VEB341
Brand: Panasonic Pages: 28
Panasonic Toughbook CF-28P3JAZQM User Manual preview
Toughbook CF-28P3JAZQM
Brand: Panasonic Pages: 36
Panasonic Toughbook CF-27EB6GDAM User Manual preview
Toughbook CF-27EB6GDAM
Brand: Panasonic Pages: 36
Panasonic CF-VEB311U Operating Instructions Manual preview
CF-VEB311U
Brand: Panasonic Pages: 44

Brands by name

Popular brands

Load more brands