manualshive.com logo in svg

Toshiba A200-EZ2204X - Satellite Pro - Core 2 Duo GHz, User Manual

The Toshiba A200-EZ2204X - Satellite Pro - Core 2 Duo GHz is a powerful and reliable laptop that offers smooth performance. To ensure that you make the most out of its features, you can easily download the free User Manual from our website. Get all the necessary guidance to maximize your laptop's capabilities at manualshive.com.

Share
Download
background image

103

Mobile Computing

Monitoring main battery power

Determining remaining battery power

Wait at least 16 seconds after turning on the computer before trying 
to monitor the remaining battery power. The computer needs this 
time to check the battery’s remaining capacity and perform its 
calculations.

1

Click Start, Control Panel, Performance and Maintenance, 
and then TOSHIBA Power Saver. 

2

Click the TOSHIBA Power Saver icon.

The Power Saver Properties window appears.

The remaining battery charge is indicated on the left side of the 
dialog box. 

With repeated discharges and recharges, the battery’s capacity 
gradually decreases. A frequently used older battery does not 
power the computer for as long as a new battery, even when 
both are fully charged.

TECHNICAL NOTE: The computer drains the battery faster at low 
temperatures. Check your remaining charge frequently if you are 
working in temperatures below 50 degrees Fahrenheit.

The computer calculates the remaining battery charge based on your 
current rate of power use and other factors such as the age of the 
battery.

What to do when the main battery runs low 

When the main battery runs low you can:

❖

Plug the computer into an external power source and recharge 
the main battery

❖

Place the computer into Hibernation mode and replace the 
main battery with a charged spare

❖

Connect the computer to an optional high capacity battery (if 
available for your computer)

❖

Save your work and turn off the computer

If you do not manage to do any of these things before the main 
battery completely runs out of power, the computer automatically 
enters Hibernation mode and turns itself off. Hibernation mode 
keeps track of where you were, so that when you turn on the power 
again, you can continue where you left off. 

NOTE

Summary of Contents for A200-EZ2204X - Satellite Pro - Core 2 Duo GHz














































































































































































































































Reviews:

No comments

Related manuals for A200-EZ2204X - Satellite Pro - Core 2 Duo GHz

ZEOS Meridian 800 User Manual preview
Meridian 800
Brand: ZEOS Pages: 80
BenQ Joybook S73V Series User Manual preview
Joybook S73V Series
Brand: BenQ Pages: 50
Fujitsu LifeBook S762 Operating Manual preview
LifeBook S762
Brand: Fujitsu Pages: 104
Fujitsu Lifebook S761 User Manual preview
Lifebook S761
Brand: Fujitsu Pages: 394
Fujitsu Lifebook T900 User Manual preview
Lifebook T900
Brand: Fujitsu Pages: 416
Fujitsu Lifebook S760 User Manual preview
Lifebook S760
Brand: Fujitsu Pages: 415
Fujitsu Lifebook S904 Operating Manual preview
Lifebook S904
Brand: Fujitsu Pages: 94
Dell Inspiron 24 5410 All-in-One Setup And Specifications preview
Inspiron 24 5410 All-in-One
Brand: Dell Pages: 27
Dell Inspiron 17 7000 Series Quick Start Manual preview
Inspiron 17 7000 Series
Brand: Dell Pages: 2
Dell Inspiron 3502 Service Manual preview
Inspiron 3502
Brand: Dell Pages: 77
Dell Inspiron 16 Plus 7620 Setup And Specifications preview
Inspiron 16 Plus 7620
Brand: Dell Pages: 26
Dell Inspiron 17 7000 Series Setup And Specifications preview
Inspiron 17 7000 Series
Brand: Dell Pages: 23
Dell Inspiron 1720 Owner'S Manual preview
Inspiron 1720
Brand: Dell Pages: 222
Dell Inspiron 3185 Service Manual preview
Inspiron 3185
Brand: Dell Pages: 88
Dell Inspiron 16 Plus 7620 Service Manual preview
Inspiron 16 Plus 7620
Brand: Dell Pages: 69
Dell Inspiron 17R 5737 Specifications preview
Inspiron 17R 5737
Brand: Dell Pages: 1
Dell Alienware x14 Setup And Specifications preview
Alienware x14
Brand: Dell Pages: 22
Dell Alienware M18x R2 Specifications preview
Alienware M18x R2
Brand: Dell Pages: 1

Brands by name

Popular brands

Load more brands