Toshiba 46WX800U, Owner'S Manual

Page: 61 / 106

61
Chapter 8: Advanced features
Setting up the Network
You can select the Network Type.
1
Y
> PREFERENCE S > Network S etup > .
2
Press
B
or
b
to highlight
Network Type
.
3
Press
C
or
c
to select
Wire d
or
Wireless
.
4
If you select Wire d , see “Advanced Network Setup”
(
-
p. 63).
If you select Wireless , see the next section.
Wireless Setup
Note:
• Continued connection to AP (Access Point) is not
guaranteed. The connection may be lost while watching
TV.
There are 3 methods for wireless setup:
• Easy S etup (WPS)
If AP supports WPS, this can be used.
– WPS is a standard designed to execute connection of
wireless LAN equipment and setup of security easily.
WPS will automatically configure all wireless settings.
•
Assiste d S etup
(setup by using AP's notification
information)
Network Name, Authentication, and Encryption are
decided based on information from AP. You manually
set the Security Key.
•
Manual S etup
(to input all settings)
Easy Setup using PBC (Push Button Configuration)
1
Y
> PREFERENCE S > Network S etup > .
2
Press
B
or
b
to select
Wireless S etup
. Press .
3
Press
B
or
b
to select Easy S etup . Press .
4
Press
C
or
c
to select PBC .
5
Press
b
to select S tart S can . Press .
6
Following the onscreen instruction, push the
appropriate button on your AP.
7
When a screen reporting that the setup succeeded
appears, press
.
To cancel searching for the AP:
Press while searching for the AP. A message will
appear. Press
C
or
c
to select Yes . Press .
Easy Setup using PIN (Personal Identification
Number)
1 Y
>
PREFERENCE S
>
Network S etup
> .
2
Press
B
or
b
to select Wireless S etup . Press .
3
Press
B
or
b
to select Easy S etup . Press .
4
Press
C
or
c
to select PIN .
5
Press
b
to select S tart S can . Press .
6
Scan screen appears. Enter the PIN displayed on
this screen into your PC or AP.
7
Press
B
or
b
to select the desired AP. Press .
Note: Check the MAC address on the label or in the
manual of the AP and select an AP.
8
When a screen reporting that the setup succeeded
appears, press
.
To cancel searching for the AP:
Press while searching for the AP. A message will
appear. Press
C
or
c
to select Yes . Press .
Assisted Setup
1
Y
> PREFERENCE S > Network S etup > .
2
Press
B
or
b
to select Wireless S etup . Press .
3
Press
B
or
b
to select Assiste d S etup . Press .
4
Press
B
or
b
to select the desired AP. Press .
Note: Check the MAC address on the label or in the
manual of the AP and select an AP.
5
Select S ecurity Key . Press . The Software
Keyboard appears.
6
Input the Security Key by using the Software
Keyboard (
-
p. 65). To save your setting, press the
BLUE button.
Note:
The Security Key must adhere to these
conditions:
- TKIP/AES: 8-63 ASCII or 64 Hex characters
- WEP: 5 or 13 ASCII or 10 or 26 Hex characters
7
Press
B
or
b
to highlight Key ID. Press
C
or
c
to
select 1, 2, 3 or 4.
Note: When Encryption is set to WEP , this option is
available.
8
Select
Done
. Press .
Note: If Network Name is not displayed, see step 4
and 5 in Manual Setup (
-
in the next section) to set
Network Name
before pressing
Done
.
Note: Settings are not saved if is pressed before
Done is selected.
O K
O K
O K
O K
O K
O K
O K
O K
O K
O K
O K
O K
O K
O K
O K
O K
O K
O K
O K
O K
WX800U_EN.pdf 61 2010/08/11 10:14:53