Toshiba 4400 Series Installation And Operation Manual Download Page 49

Page: 49 / 138

4400 Series Installation and Operation Manual – 64527-008

9 UPS Wiring

9.1 Wiring Safety

WARNING

Perform wiring and connections with correct polarity.

Be careful when connecting the UPS to the DC backup system. A

wrong connection may cause damage to the UPS, DC backup system,

or charger.

Connect ONLY one (1) ground wire to the earth ground terminal.

A missing ground

wire may cause an electrical shock hazard.

Connecting to more than one ground may cause a

ground loop.

See Chapter 9 – UPS Wiring

DO NOT force, bend, or pull wires.

DO NOT damage wire insulation.

DO NOT place heavy objects on top of UPS.

Observe the above precautions when making wire connections or

handling the wires. Failing to observe these precautions may damage

the insulation of the wires or may cause a fire or an electric shock

hazard.

NOTICE

Follow the torque criteria for tightening screws.

Loose connections may cause fire due to heating.

See Chapter 9 – UPS Wiring

Summary of Contents for 4400 Series











































































































































Search results

Summary of Contents for 4400 Series

Reviews:

Related manuals for 4400 Series

Brands by name

Popular brands

Toshiba 4400 Series, Installation And Operation Manual

Search results

Summary of Contents for 4400 Series

Reviews:

Related manuals for 4400 Series

Brands by name

Popular brands