26
Using the TV’s features (General)
PREFERENCES
REGZA-LINK Setup
Network Setup
Media Renderer Setup
Photo Frame Setup
Teletext
Panel Lock
Network Lock
Off
Auto
Auto
Off
Display Settings
2
Press
,
and then press
s
or
r
to select
Auto
Format
3
Press
v
or
w
to select
On
or
Off
�
Sound adjustment
Setting the MTS (Multi-channel TV Sound)
- analogue -
Auto mode
The MTS Auto mode automatically recognizes stereo/
bilingual programmes depending on the broadcast signal�
1
Press
MENU
, and then press
v
or
w
to display the
SOUND
menu�
0
SOUND
MTS
Dual
Dual 1
Low
Off
Balance
Advanced Sound Settings
Dolby Volume
Dynamic Range Control
Headphone Settings
Audio Level Offset
Auto
2
Press
s
or
r
to select
MTS
, and then press
v
or
w
to select
Auto
or
Mono
�
Mono mode
If you experience noise or poor reception of any stereo/
bilingual programme, set the
MTS
mode to
Mono
�
Noise will be reduced and reception may improve�
Note:
If you experience noise with a particular programme
whose channel reception is usually good, try setting
MTS mode to
Auto
, and then switch
b
to
e
Mono (monaural).
Selecting Dual 1 or Dual 2 mode
You can hear only Dual 1 or Dual 2 sound, when bilingual
programmes are received�
1
From the
SOUND
menu, press
s
or
r
to select
Dual
�
2
Press
v
or
w
to select
Dual 1
or
Dual 2
�
Notes:
•
When the MTS setting is in
Mono
mode, the
Dual
menu is not selectable.
•
The
Dual
menu setting status is stored even when
the TV is turned off.
Stereo and Bilingual transmissions
For ATV programmes
If stereo or dual language broadcasts are transmitted, the
word
Stereo
or
Dual
will appear on the screen each time
positions are changed, disappearing after a few seconds� If
the broadcast is not in stereo, the word Mono will appear�
Stereo
… Press
b
to select
Stereo
or
Mono
�
Bilingual
… Bilingual transmissions are rare� If they
are transmitted, the word
Dual
will display� Choose the
desired channel number, and if the word
Dual
appears,
press
b
to select
Dual 1
,
Dual 2
,
Mono
(NICAM) or
Dual 1
or
Dual 2
(German stereo/bilingual broadcast)�
For DTV programmes
For stereo or dual mono broadcasts, press
b
, and then
use
v
or
w
to select settings�
Mode Display
Pressing
w
d
Stereo
Stereo
S
Left
S
Right
j
Dual mono
Dual 1
S
Dual 2
S
Dual
e
Mono
—
Surround
—
Adjusting the sound Balance
1
From the
SOUND
menu, press
s
or
r
to select the
Balance
�
2
Press
v
or
w
to adjust the settings as desired�
Adjusting the Sound Navigation
You can customize the sound mode settings. Select the
appropriate mode in accordance with the installation
location of the TV (
Stand
or
Wall
) and adjust the
equalizer on-screen as desired.
1
From the
SOUND
menu, press
s
or
r
to select
Advanced Sound Settings
and then press
�
2
Press
s
or
r
to select
Sound Navigation
, and
then press
�
Surround
Off
Voice Enhancement
On
Sound Navigation
Dynamic Bass Boost
High
Advanced Sound Settings
