Toshiba 3560 Operator'S Manual Download Page 63

Page: 63 / 181

SPECIAL

FUNCTIONS

SPECIAL FUNCTIONS

Press the DUPLEX key on the BASIC
panel. Select the 1

씮

2 mode (SINGLE-TO-

DUPLEX).

●

This message will appear (see the middle
figure):

EVEN or ODD number
of originals?

Note:

If the STACK

symbol is flashing,

remove the paper remaining in the automatic
duplexer. If the messages

To remove paper from
duplexer: Press INFO

and

Remove paper from
duplexer

appear, press INFO and the sheets of paper
will automatically exit.

22222

33333

Press the Original Count, EVEN or ODD
key in response to the message.

●

If you press the Original Count key, this
message appears:

WAIT
Counting originals

The  document  feeder  will  feed  in  and
count  the  originals.  When  it  finishes
counting,  the  following  message  will
appear:

Return originals on
doc. feeder input tray

Then reset the originals in the original
feed tray in the same way as described in
step 1.

Summary of Contents for 3560






















































































































































































Search results

Summary of Contents for 3560

Reviews:

Related manuals for 3560

Brands by name

Popular brands

Toshiba 3560, Operator'S Manual

Search results

Summary of Contents for 3560

Reviews:

Related manuals for 3560

Brands by name

Popular brands