Toshiba 3560, Operator'S Manual

Page: 15 / 181

DESCRIPTION OF
THE
COPIER
13
COPY
A4
A3
B4
A5
UNIVERSAL
ORIGINAL
APS AMS
2 3 1
5 6 4
8 9 7
C/ 0
INFO
F C
100%
200%
50%
DESCRIPTION OF THE COPIER
햽
COPY SIZE Keys (v page 40)
Use these keys to select the desired size of
paper.When the paper supply of the selected
size runs out, the corresponding cassette will
flash and the message “ADD PAPER” will be
displayed on the Message Display panel.
햾
AUTOMATIC PAPER SELECTION
Key ( page 22)
Normally, the automatic paper selection (APS)
mode is selected. The copier will automati-
cally detect the size of the original and
select the same size of paper (for actual-size
copying only).
햿
AUTOMATIC MAGNIFICATION SELECTION
Key ( page 38)
When you select the automatic magnification
selection (AMS) mode with this key and set
the desired copy size, the copier will auto-
matically detect the size of the original and
calculate the correct reproduction ratio.
헀
CLEAR/STOP Key ( page 23)
Use this key to correct the copy quantity
entered or stop a multicopy run. During
multicopying, pressing this key once will stop
the copy run and pressing it twice will clear the
copy quantity to “1”.
헁
PRINT Key ( page 24)
Press this key to start copying.
헂
DIGITAL Keys
Use these keys to enter the desired number
of copies. Up to 999 copies can be set.
헃
AUTO-EXPOSURE Key ( page 44)
Normally, the auto-exposure mode is se-
lected. The copier will automatically detect
the density of the original and select the
optimum exposure for the original.
헄
MANUAL EXPOSURE Keys
( page 44)
In the manual exposure mode, the desired
copy density can be selected. Pressing the
LIGHT
key will lighten the copy in five
exposure steps and vice versa.
헅
PHOTO Key ( page 45)
To make clear copies of photographs,use this
mode.
햸 햹 햺 햻 햽
헂 헁 헀 햿 햾