33
Using the TV’s features (General)
Using REGZA-LINK
This feature uses CEC (Consumer Electronics Controls)
technology and allows the control of Toshiba REGZA-
LINK compatible devices from the TV remote control via
HDMI connection (
-
page 47)�
Note:
Not all Toshiba products currently support REGZA-
LINK.
REGZA-LINK Setup
1
From the
Preferences
menu, press
s
or
r
to select
REGZA-LINK Setup
�
2
Press
OK
and press
s
or
r
to select
Enable
REGZA-LINK
�
REGZA-LINK Setup
Enable REGZA-LINK
On
TV Auto Power
Auto Standby
Amplifier Control
Initial Speaker Setting
On
On
On
TV Speakers
Position Key Pass Through
On
3
Press
v
or
w
to select
On
or
Off
�
4
Press
s
or
r
to select the
REGZA-LINK
Setup
item you want to use and press
v
or
w
to select
On/
Off
or the desired speakers mode�
• TV Auto Power: On/Off
• Auto Standby: On/Off
• Amplifier Control: On/Off
• Initial Speaker Setting: TV Speakers/
Amplifier
• Position Key Pass Through: On/Off
REGZA-LINK functions
When
Enable REGZA-LINK
is set to
On
, the following
functions can be enabled by setting them to
On
�
TV Auto Power
The
TV Auto Power
setting allows the TV to be
automatically switched on if a REGZA-LINK device is
turned on�
Auto Standby
If
Auto Standby
is enabled, the TV, when switched off,
will automatically switch off (put into standby mode) all
connected REGZA-LINK devices�
Amplifier Control
When
Amplifier Control
is set to
On
, it allows the
“
Speaker Preference
” feature to become available�
Initial Speaker Setting
This feature allows the
Initial Speaker Setting
to be set
to
TV Speakers
or
Amplifier
� The
Amplifier
option
allows the remote control to adjust or mute the volume of
the external audio�
Notes:
•
When you turn on the amplifier, change its input
source, or adjust the sound volume, the sound
will be output from the amplifier’s speakers even
if
TV Speakers
has been selected. Turn the TV to
standby and on again to output the sound from the
TV speakers.
•
The above functions are dependent on the
connected device and TV setting.
Position Key Pass Through
When
Position Key Pass Through
for the selected
HDMI input mode is set to
On
, the
P
U
,
P
u
and number
(0-9) keys on the remote control will pass through� When
in
Off
, those operate as TV programme selection keys�
REGZA-LINK one touch play
When a connected device is switched on, REGZA-LINK
will automatically switch the TV to the appropriate HDMI
input� Also, if the TV is in standby, it will be switched on
automatically�
These functions can be enabled or disabled from the
REGZA-LINK
Setup
�
Note:
Even if the device is only showing a menu, the TV
may automatically switch to that input source.
REGZA-LINK system standby
This feature automatically puts the connected device into
standby when the TV goes into standby and vice versa�
REGZA-LINK system audio control
Using the Speaker Preference feature allows the TV
remote control to adjust the volume or mute the sound of
the speakers connected to the TV via an AV amplifier.
Ensure that the connected AV amplifier and REGZA-
LINK device are selected in the input source selection
and that
Initial Speaker Setting
is set to
Amplifier
in
the
REGZA-LINK
Setup
menu or in the
Quick Menu
(
Speakers
)�
Notes:
•
The above functions are dependent on the
connected device and TV setting.
•
When you turn on the AV amplifier, change its input
source, or adjust the sound volume, the sound will
be output from the AV amplifier’s speakers even if
TV Speakers
has been selected for
Initial Speaker
Setting
. Turn the TV first to standby and on again
to output the sound from the TV speakers.
•
The proper function may not work when operating
the AV amplifier.
110809c1_324246SL800A_En.indb 33
11.8.9 9:04:56
