Toshiba 32DT1U, Owner'S Manual

Page: 50 / 58

Chapter 8: Troubleshooting
50
Sound problems
•
Check the antenna/cable connections (

Chapter 2).
• The station may have broadcast difficulties. Try
another channel.
• The sound may be muted. Press
VOLUME
.
•
Make sure the Speakers setting is On in Audio
Settings menu.
•
If you hear no sound, try setting the MTS feature
to
Stereo
mode (

page 38).
•
If you are not receiving a second audio program
from a known SAP source, make sure the
MTS
feature is set to SAP mode (

page 38).
• If you hear audio that seems “incorrect” for the
program you are watching (such as music or a
foreign language), the SAP mode may be on. Set
the
MTS feature to Stereo mode (

page 38).
Remote control problems
• Remove all obstructions between the remote
control and the TV.
• The remote control batteries may be dead.
Replace the batteries (

page 19).
• If the TV still does not act as expected, use the
Reset Factory Defaults procedure (

page 27).
Channel tuning problems
•
The channel may have been erased from the
channel memory by the
Programming channels
automatically
feature. Add the channel to the
channel memory (

page 24).
•
The channel may be blocked by the LOCK
feature. Unblock the channel (

page 41).
•
If you are unable to tune digital channels, check
the antenna configuration (

page 23). If you
are still unable to tune digital channels, clear all
channels from the channel list and reprogram
channels into the channel memory (

page 24).
If you are still unable to tune digital channels,
use the Reset Factory Defaults procedure (

page 27). Also see “TV stops responding to
controls” and “Other problems” (

page 49).
Closed caption problems
•
If the program or video you selected is not
closed-captioned, no captions will display (

page 36).
• If text is not available, a black rectangle may
appear. If this happens, turn off the closed
caption feature (

page 36).
•
A closed-caption signal may not display
correctly in the following situations: a) when
a videotape has been dubbed; b) when the
signal reception is weak; or c) when the signal
reception is nonstandard (

page 36).
Rating blocking (V-Chip) problems
• If you forget your PIN code: While the PIN
code entering screen is displayed, press
four times within 5 seconds. The PIN code you
previously stored will be cleared (

page 39).
HDMI problems
For HDMI cables
•
Make sure to use cables with the HDMI Logo
(
) (

page 13).
Media Player problems
•
Make sure that devices are connected correctly.
• Incorrect behavior may occur with a USB HUB
connection.
• Photo files that was processed and edited by using
the PC’s application software may not be able to be
viewed.
•
The TV may select one format automatically and
play it when contents that support two or more
formats are played.
• Confirm contents of the USB storage device are
formats that correspond with this TV (

page 44).